We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten short gray shielded Cat 8 patch cables with gold RJ45 plugs

Nippon Labs

Nippon Labs 60CAT8-1-24GY-10P network ethernet cable 1 ft Gray 24 AWG 2 GHz 40 Gbps 10 pack

SKU CH-QVMF-19DYB MPN 60CAT8-1-24GY-10P

A 1 ft Cat 8 patch cable rated for 2 GHz bandwidth and up to 40 Gbps, shielded with foil and braid, 24 AWG stranded copper, gold-plated RJ45 connectors, supplied in a 10-pack

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGray
  • Supports 40 Gbps data rates with 2 GHz bandwidth
  • S/FTP shielding protects each pair and overall braid reduces interference
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 µm gold-plated RJ45 contacts resist corrosion
  • Backward compatible with Cat5e, Cat6, Cat6a and Cat7 networks

Cat 8 1 ft 10-pack overview

These Category 8 patch cords deliver up to 40 Gbps data rates and 2 GHz bandwidth over a one-foot length. The S/FTP construction uses foil-shielded pairs and an overall braid to support emerging 25GBASE-T and 40GBASE-T networks. Ten gray cables are included for multi-port deployments.

Upgrade from Cat 6A or Cat 7

The jump is worth it when your switch or NIC negotiates 25 GbE or 40 GbE and you need the 2 GHz headroom that older categories cannot guarantee. Existing Cat 5e, Cat 6 and Cat 6A links continue to work because the cables are fully backward compatible.

Pre-order checklist

Verify that both endpoints have RJ45 ports and that your rack or panel can accommodate the slightly thicker S/FTP jacket. Confirm the one-foot reach suits the device spacing; longer runs will require a different length.

Highlights

  • Supports 40 Gbps data rates with 2 GHz bandwidth
  • S/FTP shielding protects each pair and overall braid reduces interference
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 µm gold-plated RJ45 contacts resist corrosion
  • Backward compatible with Cat5e, Cat6, Cat6a and Cat7 networks

Specifications

BrandNippon Labs
Model60CAT8-1-24GY-10P
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGray
ShieldedYes
Wire Gauge24 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.68 kg
Package size203 × 140 × 64 mm

Questions about this item

What size RJ45 ports do the 24 AWG conductors fit?

The 24 AWG stranded copper conductors terminate in standard RJ45 plugs with 50 micron gold-plated contacts, fitting any standard RJ45 jack.

How do I seat the snagless boot correctly so the latch clicks?

Push the connector straight in until the soft flex push tab clicks; the moulded strain relief prevents the latch from catching on adjacent cables.

When should I replace a cable from the 10 pack?

Replace any cable if the PVC jacket shows cuts, the braid shield is exposed, or the gold-plated contacts become corroded or bent.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.