We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 60CAT8-0.5-26WT network ethernet cable

SKU CH-Z4E2-4N349 MPN 60CAT8-0.5-26WT

A 0.5 ft Cat 8 patch cable with double-shielded 26 AWG conductors, gold-plated RJ45 plugs, and a weatherproof white jacket rated for 2000 MHz and 40 Gbps

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length0.5 ft.
  • ColorWhite
  • Supports 40 Gbps transfer speeds for demanding networks
  • 2000 MHz bandwidth enables high-frequency data transmission
  • 26 AWG stranded pure copper conductors reduce signal loss
  • S/FTP shielding with foil and braid blocks interference
  • 50 µm gold-plated RJ45 contacts resist corrosion

Ideal for short, high-speed links

This Cat 8 patch cable is built for users who need up to 40 Gbps throughput across a very short run. Its .5 ft length suits rack-to-panel or device-to-switch connections where excess slack is undesirable. The 26 AWG stranded pure copper conductors keep the cable flexible for tight routing.

Shielded construction for clean signals

Each of the four twisted pairs is wrapped in aluminium foil with an overall braid shield, and the RJ45 plugs carry 50 µm gold-plated contacts. A moulded strain-relief boot and snagless push tab prevent latch damage during repeated insertion. The PVC jacket is rated for in-wall and outdoor exposure.

2 GHz bandwidth enables 25G and 40GBASE-T

The cable is specified to 2000 MHz, the frequency ceiling that defines Cat 8 performance and supports emerging 25 Gbps and 40 Gbps copper standards. It remains fully backward compatible with existing Cat 5e, Cat 6, Cat 6A and Cat 7 infrastructure.

Highlights

  • Supports 40 Gbps transfer speeds for demanding networks
  • 2000 MHz bandwidth enables high-frequency data transmission
  • 26 AWG stranded pure copper conductors reduce signal loss
  • S/FTP shielding with foil and braid blocks interference
  • 50 µm gold-plated RJ45 contacts resist corrosion

Specifications

BrandNippon Labs
Model60CAT8-0.5-26WT
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length0.5 ft.
ColorWhite
ShieldedYes
Wire Gauge26 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Ideal for any device with an RJ45 port, including networking switches, IP Cam, routers, Nintendo switch,
Shipping weight0.06 kg
Package size152 × 127 × 25 mm

Questions about this item

What bandwidth does the Cat8 cable support and what data rate does that enable?

The cable is rated for up to 2000 MHz bandwidth, which enables a maximum data rate of up to 40Gbps.

What are the physical dimensions and shielding of the conductors?

It uses 26 AWG stranded pure copper conductors, each pair foil shielded with an overall braid shield, in a white PVC jacket.

How do you connect the RJ45 plugs without damaging the latch?

Press the soft flex push tab to release the lock before pulling; the snagless moulded strain relief prevents the latch from catching on obstacles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.