Nippon Labs 30HM2-10HM-AOCL34K-35 35 ft hdmi cable

Nippon Labs 35 ft Active Optical HDMI Cable

This 35-foot cable uses hybrid active optical fibre to carry HDMI 2.0 signals over long distances without signal loss. It terminates in standard HDMI Type A male connectors on both ends for direct source-to-display connection. The CL3 rating allows in-wall or in-ceiling routing for permanent installations. Builders and integrators running 4K video across rooms or through conduit will find the thin 4.8 mm diameter practical.

Suited for 4K 60 Hz home cinema

The cable supports 4K resolution at 60 Hz with 4:4:4 chroma subsampling at 8-bit colour depth and an 18 Gbps data rate. HDR, EDID, HDCP 2.2, 3D, CEC and ARC pass through without extra configuration. Multi-channel audio formats including Dolby Atmos and DTS-HD Master Audio are transmitted. Users needing 8K resolution, higher refresh rates at 4K, or HDMI 2.1 features such as VRR should consider a different specification.

35-foot length with CL3 rating for in-wall routing

The fixed 35-foot length determines whether the cable reaches between equipment rack and display without slack or tension. CL3 compliance satisfies building codes for vertical runs inside walls or ceilings. Gold-plated connectors resist corrosion for long-term reliability. The 4.8 mm outside diameter eases pulls through tight conduit. Verify the exact route distance before ordering because the length cannot be adjusted.