NEMIX RAM
NEMIX RAM 32GB 2x16GB DDR4 3200MHz CL22 SODIMM laptop RAM
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for laptops and small-form-factor PCs
- Dual-channel kit doubles bandwidth with two 16 GB modules
- DDR4 3200 MHz speed moves data at PC4-25600 rates
- Low 1.2 V operation cuts power draw and heat
- CL22 latency keeps response tight for everyday workloads
- 260-pin SODIMM fits standard laptop and small-form-factor slots
32 GB DDR4 SODIMM kit for laptops and SFF PCs
This kit supplies 32 GB of DDR4 memory across two 16 GB modules running at 3200 MHz. It targets owners of notebooks, all-in-ones or small-form-factor PCs that accept 260-pin SODIMMs and want a straightforward capacity increase without ECC or registered buffers.
Capacity and headroom at CL22 1.2 V
The two 2Rx8 modules operate at 1.2 V with a CAS latency of 22, delivering PC4-25600 bandwidth for everyday multitasking, browser tabs and office workloads. Heavy video editing, large virtual-machine sets or memory-bound rendering will exhaust the 32 GB ceiling, and the fixed CL22 timing leaves no headroom for manual overclocking.
Fits 260-pin slots with standard voltage
Installation requires two adjacent SODIMM slots and a platform that supports 1.2 V DDR4 at 3200 MHz. The non-ECC unbuffered design keeps the memory controller simple, freeing the builder from matching registered or load-reduced modules, but the kit cannot be used in systems limited to 16 GB maximum or those requiring ECC error correction.
Highlights
- Dual-channel kit doubles bandwidth with two 16 GB modules
- DDR4 3200 MHz speed moves data at PC4-25600 rates
- Low 1.2 V operation cuts power draw and heat
- CL22 latency keeps response tight for everyday workloads
- 260-pin SODIMM fits standard laptop and small-form-factor slots
Specifications
No published specifications for this item yet.
Questions about this item
Will this DDR4 3200MHz CL22 kit run alongside my existing DDR4 SODIMMs?
The kit operates at 3200MHz with CL22 timing and 1.2V voltage. Most systems will clock all installed modules to the speed of the slowest module, so mixed speeds will run at the lower frequency.
How can I confirm the kit is running at 3200MHz CL22 after installation?
Check the memory speed and timings in your system BIOS or use a tool like CPU-Z. You should see 3200MHz (PC4-25600) and CL22 reported for each 16GB module.
What comes in the box and do I need any extra parts to install it?
The box contains two 16GB 260-pin SODIMM modules. No additional cables, brackets or tools are required for a standard laptop or SFF PC memory slot.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



