NEMIX RAM
NEMIX RAM 16GB DDR4 2666 PC4-21300 2Rx8 1.2V 260-Pin SODIMM
A 16 GB DDR4 2666 SO-DIMM running at 1.2 V with 260 pins for laptop upgrades
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- 16 GB capacity lets you run more apps simultaneously
- 2666 MT/s DDR4 speed moves data faster through the system
- 2 V low voltage reduces power draw and heat
- 260-pin SO-DIMM form factor fits standard laptop slots
- Rigorously stress-tested modules deliver reliable operation
16GB DDR4 2666 SO-DIMM upgrade
This NEMIX RAM module provides 16GB of DDR4 memory at 2666MHz in a 260-pin SO-DIMM form factor. It operates at 1.2V with a 2Rx8 configuration and PC4-21300 rating. The module is designed for laptop memory slots and compatible QNAP NAS devices.
Suits DDR4 2666 SO-DIMM slots
Buyers whose systems accept DDR4 2666 SO-DIMM memory can install this module directly. It is not for systems that require a different DDR generation, a different pin count, a DIMM form factor, ECC registered memory, or speeds other than 2666MHz.
PC4-21300 speed rating
The module runs at DDR4 2666 (PC4-21300); the system must support this exact speed grade for correct operation. If the platform requires a higher or lower DDR4 speed, this part will not match the required specification.
Highlights
- 16 GB capacity lets you run more apps simultaneously
- 2666 MT/s DDR4 speed moves data faster through the system
- 2 V low voltage reduces power draw and heat
- 260-pin SO-DIMM form factor fits standard laptop slots
- Rigorously stress-tested modules deliver reliable operation
Specifications
| Capacity | 16GB |
|---|---|
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
Questions about this item
What DDR4 speed and form factor must my laptop or NAS already support for this 16 GB 2666 MHz 260-pin SODIMM to work?
The system needs a DDR4 SO-DIMM slot that accepts PC4-21300 modules at 1.2 V.
If I keep an existing DDR4 module in the second slot, what happens to the 2666 MHz rating of this stick?
Both modules will run at the lowest common speed supported by the platform; the 2666 MHz module will down-clock to match the slower stick.
How can I confirm the module is recognised at its rated 2666 MHz after installation?
Check the memory speed in BIOS, UEFI or a system-information tool such as CPU-Z; it should report 2666 MT/s for the new module.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Intel HNS2600KPF barebone pc 1U dual Xeon DDR4 512 GB
- Xeon
- Socket R3 (LGA2011-…



