NDLIULEI
NDLIULEI 4650N-465 120x120x38mm 230V case fan
A 120 mm metal cabinet fan running on 230 V AC with 17–18 W draw and up to 1793 m³/h airflow
- High airflow up to 1793 m³/h for effective cabinet cooling
- Long 100000-hour rated lifespan reduces replacement frequency
- 230 V AC operation suits mains-powered enclosures
- 120 x 120 x 38 mm frame fits standard fan mounts
- All-metal construction withstands high-temperature environments
NDLIULEI 4650N-465 230 V Cabinet Fan
This 120 mm square all-metal fan runs directly from 230 V mains at 50 Hz or 60 Hz. It is built for industrial cabinets and enclosures that need continuous airflow without a separate power supply.
Suited for rack and cabinet cooling.
Installers wiring equipment racks, telecom cabinets or server enclosures will appreciate the direct mains connection and 100 000 hour rated life. Builders who need a fan powered from a motherboard 12 V header or a four-pin PWM controller should look elsewhere.
230 V AC nominal voltage decides fit
The single specification that determines compatibility is the 230 V AC supply requirement. If your chassis or cabinet provides mains power at 50 Hz to 60 Hz this unit integrates directly; any lower-voltage DC environment cannot use it.
Highlights
- High airflow up to 1793 m³/h for effective cabinet cooling
- Long 100000-hour rated lifespan reduces replacement frequency
- 230 V AC operation suits mains-powered enclosures
- 120 x 120 x 38 mm frame fits standard fan mounts
- All-metal construction withstands high-temperature environments
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 2.680 RPM or the 3.060 RPM version of this 120x120x38mm 230V fan?
This single model runs between 2.680 and 3.060 RPM depending on whether the supply is 50 Hz or 60 Hz, so you do not choose a version — the same unit covers both speeds.
What does the 17 W to 18 W power draw mean once the fan is installed in a cabinet?
At 230 V the fan draws 102–110 mA, so it adds roughly 17–18 W to the enclosure's heat load while moving 1577–1793 m³/h of air through the chassis.
The fan is rated for 230 V at 50–60 Hz — what does that cap in practice?
It locks the operating voltage and frequency range; you must feed it 230 V AC at 50 Hz or 60 Hz, and the speed, airflow and power will stay within the 2.680–3.060 RPM, 1577–1793 m³/h and 17–18 W bands.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



