NavePoint
NavePoint Cat5e UTP Patch Cable 15 FT 1 Gbps Gray 10-Pack
A ten-pack of 15-foot Cat5e UTP patch cables rated for 1 Gbps with snagless RJ45 connectors
- ColorGray
- Snagless boots protect connectors during installation
- Stranded 24 AWG copper conductors ensure flexible, reliable signal paths
- Gold-plated RJ45 contacts resist corrosion for lasting connectivity
- 100 MHz bandwidth supports 1 Gbps Gigabit Ethernet speeds
- 10-pack of 15 ft cables simplifies multi-device network deployments
10-Pack Cat5e patch cables
This ten-pack supplies fifteen-foot gray Cat5e UTP patch cords for wiring multiple network drops in one purchase. Each cable uses stranded 24 AWG copper conductors with HD-PE insulation and gold-plated RJ45 connectors. The snagless boot design protects the locking tab during frequent insertion and removal. They suit offices, labs or home networks needing several identical runs.
Thermals noise and power
Passive copper construction means the cables generate no heat, emit no noise and draw no power themselves. Signal loss stays low thanks to the HD-PE insulator and 117 Ohm/km conductor resistance rated in the specification. The stranded conductors maintain flexibility without degrading the 100 MHz bandwidth or 1 Gbps throughput. No active components are present to fail or require cooling.
Build fit and constraints
Universal RJ45 plugs connect directly to any standard LAN port on routers, switches, servers, VoIP phones or media players. The fifteen-foot length reaches between rack equipment, wall outlets and desktop devices without excess slack. Buyers who need longer runs, shielded cable or higher category ratings will need different products. Each cord is UL listed for safety compliance in permanent installations.
Highlights
- Snagless boots protect connectors during installation
- Stranded 24 AWG copper conductors ensure flexible, reliable signal paths
- Gold-plated RJ45 contacts resist corrosion for lasting connectivity
- 100 MHz bandwidth supports 1 Gbps Gigabit Ethernet speeds
- 10-pack of 15 ft cables simplifies multi-device network deployments
Specifications
| Brand | NavePoint |
|---|---|
| Color | Gray |
Questions about this item
How do I install the 24 AWG stranded copper cable without damaging the RJ45 connectors?
Press the snagless boot tab down fully before inserting the RJ45 plug into the port; the strain relief boot protects the latch during repeated insertions and prevents the connector from catching on adjacent cables.
What maintenance will the gold-plated connectors and PVC jacket need over time?
Wipe the gold-plated contacts with a dry lint-free cloth if dust builds up; the PVC jacket resists abrasion but should be inspected for kinks or cuts after any sharp bends near the strain relief boots.
At what point does the 100 MHz bandwidth limit throughput on a sustained 1 Gbps link?
The cable is rated for 100 MHz bandwidth and 1 Gbps maximum transfer speed; sustained gigabit traffic will hit the 100 MHz ceiling before any higher frequency signalling can be used.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



