ModMyMods
ModMyMods MOD-0076 chipset cooling 14mm x 14mm x 10mm black aluminium 3M 8810 adhesive
A 14mm square aluminium heatsink with pre-applied 3M 8810 thermal adhesive for chipset or Raspberry Pi cooling
- Heatsink MaterialAluminum
- Fan ColorBlack
- FeaturesAavid Thermalloy Premium Black Heat Sink (14mm x 14mm x 10mm
- Compact 14mm x 14mm footprint fits tight board layouts
- 10mm profile clears low-profile components and cases
- Premium 3M 8810 adhesive transfers heat without screws or clips
- Black anodised aluminium resists corrosion and blends with dark PCBs
- Designed for Raspberry Pi chipset cooling applications
Compact Aluminium Heatsink for Chipset Cooling
This small aluminium heatsink measures 14mm by 14mm by 10mm and comes with a pre-applied 3M 8810 thermally conductive adhesive backing. It is designed to attach directly to memory modules or chipset components that fit within its footprint. The black finish provides a discreet look inside a build.
Adhesive Mounting Limits Reusability
The 3M 8810 adhesive transfer tape creates a strong, permanent bond once pressed onto a clean surface. This mounting method suits components that will not be moved or upgraded frequently. Removing the heatsink later risks damaging the component or leaving residue that is difficult to clean.
Handles Modest Chipset Heat Loads
The 14mm square base and 10mm fin height suit low-power controllers such as those found on a Raspberry Pi board. It provides passive dissipation for components with a small thermal footprint. Larger chipsets or memory modules with higher heat output will exceed the capacity of this heatsink.
Highlights
- Compact 14mm x 14mm footprint fits tight board layouts
- 10mm profile clears low-profile components and cases
- Premium 3M 8810 adhesive transfers heat without screws or clips
- Black anodised aluminium resists corrosion and blends with dark PCBs
- Designed for Raspberry Pi chipset cooling applications
Specifications
| Brand | GENERIC |
|---|---|
| Model | MOD-0076 |
| Heatsink Material | Aluminum |
| Fan Color | Black |
| Features | Aavid Thermalloy Premium Black Heat Sink (14mm x 14mm x 10mm) with Premium 3M 8810 Thermally Conductive Adhesive Transfer Back Works with Raspberry PI |
Questions about this item
Which size of this heatsink should I pick for my board?
This model is a single 14mm by 14mm by 10mm piece; there are no alternative capacities or versions listed.
What does the 10mm height mean once it is fitted?
The 10mm thickness sits above the chip, so confirm your case or shroud clears that profile before installing.
How does the 3M 8810 adhesive perform in practice?
The 3M 8810 thermally conductive transfer tape bonds the aluminium sink directly to the component without screws or paste.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
STARTECH
STARTECH C6PATCH1RD 1 ft Red Cat6 network ethernet cable
- others
- 1 ft
$5.99
0.00007225BTC
In stock