We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LSI

LSI 9300-8e SGL LSI00343 12 Gbit/s SAS SATA HBA

SKU CH-G2TD-GT1D3

12 Gbit/s HBA with PCIe 3.0 x8 and two miniSAS SFF-8644 ports for up to eight SAS or SATA drives, full and low-profile brackets included, IT mode firmware installed

  • 12 Gbit/s transfer rate for fast SAS or SATA storage
  • PCIe 8x 3.0 host link keeps eight drives at full speed
  • Two miniSAS SFF-8644 ports connect up to eight drives
  • Native 4k drive support maximises capacity per bay
  • Pre-loaded IT mode firmware enables direct OS control

Purpose-built host bus adapter

The LSI 9300-8e SGL connects up to eight SAS or SATA drives through two miniSAS SFF-8644 ports. It targets server builders and storage enthusiasts who need external drive expansion without a RAID layer. The card runs in IT mode so the operating system sees every drive directly.

Replaces older 6 Gbit/s HBAs

Moving from a 6 Gbit/s controller to this 12 Gbit/s model doubles the per-lane bandwidth for spinning disks and SATA SSDs. The upgrade is worthwhile when you saturate existing ports with multiple high-capacity drives or when you add newer 12 Gbit/s SAS media. It does not help if your backplane or cabling remains limited to 6 Gbit/s.

Straightforward install with included brackets

Both full-height and low-profile brackets ship in the box so the card fits most chassis. The PCIe 8x 3.0 slot must be wired for at least eight lanes; a x4 physical slot will halve throughput. Firmware is already flashed to IT mode, removing the most common configuration error.

Highlights

  • 12 Gbit/s transfer rate for fast SAS or SATA storage
  • PCIe 8x 3.0 host link keeps eight drives at full speed
  • Two miniSAS SFF-8644 ports connect up to eight drives
  • Native 4k drive support maximises capacity per bay
  • Pre-loaded IT mode firmware enables direct OS control

Specifications

No published specifications for this item yet.

Questions about this item

Does the LSI 9300-8e HBA need an x8 PCIe 3.0 slot and SFF-8644 cables for eight drives?

Yes. The card plugs into an x8 PCIe 3.0 slot and uses two miniSAS SFF-8644 ports to connect up to eight SAS or SATA drives.

Which bracket should I use and how do I enable IT mode on this LSI 9300-8e?

Choose the full-height or low-profile bracket that matches your chassis. The latest IT mode firmware is already installed, so no flashing step is required.

Will the LSI 9300-8e HBA support future 4Kn drives without a firmware update?

The controller supports native 4k hard drives out of the box, so 4Kn drives work without an additional firmware upgrade.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.