We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fiber patch cable with SC and LC connectors

LR-LINK

LR-LINK Fiber Patch Cable SC to LC Single-Mode Simplex 1/2/3m

SKU CH-VWM6-4QAVF

Single-mode simplex fiber patch cable with SC-to-LC connectors for SFP transceivers, available in 1, 2 or 3 metre lengths

  • Low insertion loss for minimal signal attenuation
  • High return loss reduces signal reflections
  • Single-mode simplex design for fast Ethernet and Fibre Channel
  • Ceramic connectors ensure low signal loss and high reliability
  • PVC jacket is wear-resistant and environmentally friendly

SC/LC Single-Mode Simplex Patch Cable

This LR-LINK fibre patch cable connects equipment with SC and LC interfaces using single-mode simplex fibre. Available in one-, two- or three-metre lengths, it is built for Fast Ethernet and Fibre Channel links. The cable uses a PVC jacket and ceramic ferrules to deliver low insertion loss and high return loss. It is suited to installers and network engineers who need a ready-made jumper for SFP transceivers.

Replacing Damaged or Mismatched Jumpers

The cord replaces an existing patch lead that has failed, has the wrong connector pairing, or is too short for a re-rack. Because it meets IEC quality-testing standards, the upgrade is worthwhile when measured loss on the old link exceeds the budget for the run. It also serves when a simplex connection must be added between two single-mode ports without splicing. No other cable type or fibre count is addressed by this product.

Suits Single-Mode Simplex Links Only

This jumper suits technicians terminating single-mode simplex circuits between SC and LC ports in LAN, CATV, instrument or telecom racks. It does not suit multimode installations, duplex circuits, or links requiring APC-polished end faces. Buyers needing higher fibre counts, armoured sheathing, or pre-terminated trunk cables should look at other products.

Highlights

  • Low insertion loss for minimal signal attenuation
  • High return loss reduces signal reflections
  • Single-mode simplex design for fast Ethernet and Fibre Channel
  • Ceramic connectors ensure low signal loss and high reliability
  • PVC jacket is wear-resistant and environmentally friendly

Specifications

No published specifications for this item yet.

Questions about this item

What connector types and polish are on the SC and LC ends of this single-mode simplex patch cable?

The cable has an SC connector on one end and an LC connector on the other, both single-mode simplex with ceramic ferrules.

How do I correctly insert the SC and LC connectors into an SFP transceiver without damaging the ceramic ferrules?

Remove dust caps, align the key on the SC connector and the tab on the LC connector, then push straight in until each clicks; never twist or force the ferrule.

When should I plan to clean or replace this patch cable to maintain low insertion loss?

Clean both connector end-faces with a lint-free wipe and isopropyl alcohol before every mating; replace the cable if visual inspection shows scratches, contamination that won't clean, or if insertion loss rises above your link budget.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.