We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metallic rectangular power adapter with built-in cooling fan and ventilation holes, screw terminals visible on one side

KEHIPI

KEHIPI 24V 15A 360W power adapter

SKU CH-TDPK-XSS7P

Converts 110-220V AC to 24V DC at 15A with built-in fan cooling and short-circuit protection for LED strips and CCTV systems

  • ColorMetallic
  • Dimensions21.0 in x 11.0 in x 5.0 in
  • Weight0.6 kilograms
  • Delivers 360 W for demanding LED installations
  • Accepts 110 V or 220 V input with manual selector
  • Built-in fan and vented metal case boost heat dissipation
  • circuit, high-voltage and over-voltage protection safeguards connected gear
  • Compatible with WS2811, WS2812B and WS2813 pixel strips

KEHIPI 24V 15A 360W Adapter

This KEHIPI power adapter delivers a regulated DC 24V output at up to 15A for a maximum of 360W. It suits installers powering LED pixel strips such as WS2811, WS2812B or WS2813, along with CCTV cameras, security systems and industrial automation projects. The unit accepts a universal AC input range of 110V to 220V selectable by switch.

Metal case with fan and screw terminals

A metal enclosure measuring 21.0 in by 11.0 in by 5.0 in houses a built-in cooling fan and multiple ventilation holes for heat dissipation. Connections use screw terminals for AC live and neutral input plus DC positive and negative output, with an additional adjuster for a 10% voltage trim. Four mounting holes of 2.5mm diameter allow secure surface fixing.

Replaces open-frame or lower-wattage supplies

This adapter replaces open-frame units or lower-wattage bricks when a protected, fan-cooled metal chassis is required for continuous indoor operation. The jump is worth it when short-circuit, over-voltage and high-voltage protection matter, and when the 360W capacity covers the full load without derating. It is not for outdoor installations or multi-strip arrays beyond the single-strip rating.

Highlights

  • Delivers 360 W for demanding LED installations
  • Accepts 110 V or 220 V input with manual selector
  • Built-in fan and vented metal case boost heat dissipation
  • circuit, high-voltage and over-voltage protection safeguards connected gear
  • Compatible with WS2811, WS2812B and WS2813 pixel strips

Specifications

BrandAclorol
ModelYC-2415T
Part NumberYC-2415T
ColorMetallic
Dimensions21.0 in x 11.0 in x 5.0 in
Weight0.6 kilograms

Questions about this item

What does the 110-220 V AC input switch cap in practice?

The unit accepts AC 110 V or 220 V at 50/60 Hz and delivers a regulated DC 24 V output up to 15 A (360 W max). Select the correct input voltage with the switch before powering on to avoid damage.

What are the mounting hole dimensions and spacing for the metal case?

Each fixing screw hole is 2.5 mm (0.1 in) in diameter. The case measures 21.0 in × 11.0 in × 5.0 in, so hole centres follow that rectangular footprint.

How do I wire the L/N and +V/-V terminals, and which step is commonly missed?

Connect live to L and neutral to N for AC input; connect load positive to +V and negative to -V for DC output. The step often missed is setting the 110/220 V selector switch to match the mains voltage before applying power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.