We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small green circuit boards with components and a blue potentiometer each

KEHIPI

KEHIPI 10pcs MT3608 DC-DC Boost Converter 2A Adjustable Step Up Module

SKU CH-5VZM-ADDHR

Pack of ten MT3608 boost modules stepping 2–24 V input up to 28 V at 2 A with 93 % efficiency

  • Color10 PCS
  • Package ContentsMT3608 DC-DC Step Up Boost Power Converter
  • Boost voltage from 2 V up to 28 V with adjustable output
  • Deliver up to 2 A peak current for small loads
  • Achieve 93 % maximum conversion efficiency
  • Compact 36 × 17 × 14 mm board fits tight spaces
  • Ten modules included for multiple projects

Ten-piece boost converter kit

This pack contains ten MT3608 step-up modules that raise a 2 V to 24 V source to an adjustable 5 V to 28 V output. Each board handles up to 2 A and reaches 93 % efficiency. The compact 36 mm by 17 mm footprint suits breadboard experiments and permanent low-power installations alike.

Micro-USB input and potentiometer control

A micro-USB socket lets you feed the module from a standard USB power adapter, making 9 V, 12 V, 18 V or 24 V outputs easy to obtain without soldering a separate supply. The on-board potentiometer sets the exact output voltage, which must always stay above the input level.

Verify your source and load requirements

Confirm that your input source stays within the 2 V to 24 V range and never exceeds the maximum rated voltage. Ensure the load draws no more than 2 A peak current, and remember that the converter only steps voltage up, so the desired output must be higher than the available input.

Highlights

  • Boost voltage from 2 V up to 28 V with adjustable output
  • Deliver up to 2 A peak current for small loads
  • Achieve 93 % maximum conversion efficiency
  • Compact 36 × 17 × 14 mm board fits tight spaces
  • Ten modules included for multiple projects

Specifications

BrandAITRIP
ModelMT3608
Part NumberEC169104510P
Color10 PCS
Package ContentsMT3608 DC-DC Step Up Boost Power Converter

Questions about this item

Will the onboard potentiometer need periodic recalibration or replacement after extended use?

The potentiometer sets output voltage and has no specified service interval; it is soldered to the board and not designed for user replacement.

What limits sustained output at the 2 A rating before the module overheats or shuts down?

The peak current is capped at 2 A and the maximum input voltage is 24 V; no thermal-shutdown temperature is published, so continuous operation near both limits relies on passive cooling only.

How much heat does the board generate when running at full load all day?

At up to 93 % efficiency the remainder becomes heat; the 36 x 17 x 14 mm PCB has no heatsink or fan, so surface temperature will rise with load and ambient conditions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.