We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular RJ45 Cat6 coupler, 10 pack

Jansicotek

Jansicotek 10-Pack RJ45 Female-Female Cat6 Coupler White

SKU CH-6RHX-YH18C

Ten white RJ45 female-to-female couplers join two Cat6 cables for runs up to 10 Gbps

  • Option10 Pack
  • Extend Ethernet runs by joining two cables
  • Supports up to 10 Gbps on Cat6 and Cat7 links
  • Nickel-plated contacts with snap-in clip resist corrosion
  • Meets TIA/EIA 568-C.2 Category 6 performance standard
  • Ten couplers included for multiple connection points

10-Pack RJ45 Cat6 Couplers

This set supplies ten white RJ45 female-to-female couplers for joining two Ethernet patch cables into a longer run. Each unit uses 8P8C contacts with nickel plating and a snap-in retaining clip. The housings are high-impact, fire-retardant plastic. They meet Category 6 performance per TIA/EIA 568-C.2 and are RoHS compliant.

Extending Fixed-Length Cables

Installers who need to bridge two shorter cables in a home, office or rack will find these couplers a direct solution. They support Cat7, Cat6, Cat5e and Cat5 cables at speeds up to 10 Gbps. Buyers who need a single gender changer, a keystone jack or a field-termination plug should look at a different product type.

Category 6 Headroom

The couplers are verified to the Category 6 standard, so they comfortably handle Gigabit Ethernet and 10 Gigabit links over the supported cable types. Performance will drop if the combined cable length exceeds the channel limits defined by the TIA/EIA standard or if lower-grade cable is used in the run.

Highlights

  • Extend Ethernet runs by joining two cables
  • Supports up to 10 Gbps on Cat6 and Cat7 links
  • Nickel-plated contacts with snap-in clip resist corrosion
  • Meets TIA/EIA 568-C.2 Category 6 performance standard
  • Ten couplers included for multiple connection points

Specifications

Option10 Pack

Questions about this item

What type of Ethernet cables do I need to connect to the RJ45 female ports on these couplers?

You need cables with standard RJ45 male plugs. The couplers accept Cat5, Cat5e, Cat6 or Cat7 patch cords, each using the 8P8C pinout.

Will these Cat6-rated couplers degrade the performance of my existing Cat5e cable runs?

The couplers meet Category 6 performance per TIA/EIA 568-C.2, so they will not become the bottleneck on a Cat5e link; the run stays limited to the cable's own 1 Gbps rating.

How can I confirm each coupler is passing traffic at up to 10 Gbps after installation?

Connect a known-good Cat6 or Cat7 link through the coupler and run a throughput test; sustained speeds near 10 Gbps with low error counts show the nickel-plated contacts and retaining clips are seated correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.