We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
iStarUSA refurbished eSATA to SATA passive cable one metre black connectors

iStarUSA Inc.

iStarUSA Inc. K-ES2SAL-1M-RF server accessory eSATA to SATA 1M passive cable 6 Gb/s

SKU CH-KY78-8ABV4 MPN K-ES2SAL-1M-RF

One-metre passive eSATA to SATA cable supports 6 Gb/s transfer with pull-type latch connectors

  • TypeCable
  • SpecificationsRoHS Compliance Version: Yes Length: 1M Latch Style: Pull Ty
  • FeaturesSATA to eSATA external cable Male eSATA 7-pin to Male eSATA
  • Connect external drives at full 6 Gb/s speed with passive eSATA to SATA cable
  • Secure pull-type latch keeps connectors firmly seated during operation
  • One-metre length fits typical rack and desk layouts
  • RoHS compliant build meets environmental standards
  • Works with all standard eSATA devices for broad compatibility

Server accessory eSATA cable

This refurbished iStarUSA cable connects an eSATA port to a SATA device over a one-metre passive link. It uses male 7-pin connectors on both ends and supports the 6 Gb/s transfer rate. The pull-type latch secures the connection without a directional requirement. It is built for server and storage configurations that need an external SATA link.

Replaces shorter or damaged eSATA links

The one-metre length suits rack-to-drive or enclosure-to-host runs where a standard half-metre cable falls short. Upgrade when the existing cable limits drive placement or shows connector wear. The passive design means no power adapter is needed, so the swap is a direct plug-in with no extra cabling.

Handles 6 Gb/s SATA throughput

The cable carries full 6 Gb/s bandwidth for single-drive external arrays, backup targets or JBOD expansions. It runs out when the link distance exceeds one metre or when the host port cannot supply the signal level required for passive operation at that speed. Multi-drive enclosures needing longer runs will need an active or powered alternative.

Highlights

  • Connect external drives at full 6 Gb/s speed with passive eSATA to SATA cable
  • Secure pull-type latch keeps connectors firmly seated during operation
  • One-metre length fits typical rack and desk layouts
  • RoHS compliant build meets environmental standards
  • Works with all standard eSATA devices for broad compatibility

Specifications

BrandiStarUSA
ModelK-ES2SAL-1M-RF
TypeCable
SpecificationsRoHS Compliance Version: Yes
Length: 1M
Latch Style: Pull Type
Directional: No
Connector: SATA to eSATA
Type: Passive
Transfer Rate: 6 Gb/s
FeaturesSATA to eSATA external cable
Male eSATA 7-pin to Male eSATA 7-pin connectors
Working with all the standard eSATA products
Shipping weight1.36 kg
Package size305 × 203 × 152 mm

Questions about this item

What clearance does the pull-type latch need on the eSATA port?

The pull-type latch requires enough rear clearance to grip and squeeze the release tab while pulling the connector straight out; allow roughly 20 mm behind the port.

Which orientation avoids damaging the keyed eSATA connector during insertion?

Align the L-shaped key on the male eSATA plug with the port notch, push straight in until the latch clicks, and do not force it at an angle.

When should the cable be replaced to maintain 6 Gb/s signal integrity?

Replace the cable if the latch no longer clicks securely, if the plug wiggles in the port, or if intermittent link errors appear during heavy I/O.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.