We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB riser card with short flat ribbon cable attached

iStarUSA Inc.

iStarUSA Inc. DD-766R-C5-02 PCIe x16 Reversed Riser Card server accessory

SKU CH-G8F9-55MWW MPN DD-766R-C5-02

A PCIe x16 riser card with a 5 cm ribbon cable that reverses slot orientation for server chassis

  • TypeRiser Card
  • SpecificationsRoHS Compliance Version: Yes Standard Drive Bays: None MB Sl
  • Reversed slot orientation enables flexible GPU placement in tight chassis
  • 5 cm ribbon cable allows clearance around motherboard components
  • PCIe x16 interface preserves full bandwidth for high-performance add-in cards
  • RoHS compliant construction meets environmental material standards
  • Designed for motherboard slot position 7 to match specific server layouts

Reversed PCIe x16 Riser Card

This iStarUSA DD-766R-C5-02 riser card redirects a PCIe x16 slot into a reversed orientation using a short ribbon cable. It is intended for server builders who need to reposition an expansion card inside a constrained chassis. The accessory carries RoHS compliance and was first listed by the manufacturer in 2016.

Slot 7 Reverse Mounting

The card plugs into motherboard slot 7 and extends the connection away from the board through a 5 cm ribbon cable. This layout frees vertical clearance above the slot so a full-height card can sit parallel to the motherboard instead of standing upright. No drive bays are occupied and no additional power connectors are required.

5 cm Ribbon Cable Included

The bundled 5 cm ribbon cable is the only accessory supplied and it determines the maximum offset between the motherboard slot and the target card. Its fixed length limits placement to tight spaces within the same enclosure section. No software, brackets or screws are provided with the riser.

Highlights

  • Reversed slot orientation enables flexible GPU placement in tight chassis
  • 5 cm ribbon cable allows clearance around motherboard components
  • PCIe x16 interface preserves full bandwidth for high-performance add-in cards
  • RoHS compliant construction meets environmental material standards
  • Designed for motherboard slot position 7 to match specific server layouts

Specifications

BrandiStarUSA
ModelDD-766R-C5-02
TypeRiser Card
SpecificationsRoHS Compliance Version: Yes
Standard Drive Bays: None
MB Slot Position: 7 (reversed with cable)
Shipping weight1.36 kg
Package size152 × 102 × 51 mm

Questions about this item

Does the 5 cm ribbon cable limit the PCIe lane count?

The card carries a full x16 connection through the 5 cm ribbon cable.

Will the riser generate extra heat or noise during continuous operation?

The passive riser has no fan or active components, so it adds no noise or measurable heat.

What motherboard slot position is required for the reversed layout?

The card is designed for motherboard slot position 7 with the reversed orientation.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.