We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold edge connector and ribbon cable attached

iStarUSA Inc.

iStarUSA Inc. DD-631-CX PCIe x1 to PCI Riser Card server accessory

SKU CH-CZ33-DGEPD MPN DD-631-CX

PCIe x1 to PCI riser card with optional 9 cm or 13 cm shielded ribbon cable

  • TypeRiser Card
  • SpecificationsRoHS Compliance Version: Yes Standard Drive Bays: None MB Sl
  • FeaturesOptional with cable length 9,13cm selection
  • RoHS compliant design meets environmental standards
  • PCIe x1 to PCI conversion extends legacy card support
  • Optional 9cm or 13cm EMI shielded cable suits chassis layout
  • Riser card format enables flexible motherboard slot positioning
  • New condition ensures reliable server accessory performance

PCIe x1 to PCI Riser Card

The iStarUSA DD-631-CX is a riser card that converts a PCIe x1 slot into a standard PCI slot for server chassis. It is intended for administrators who must install legacy PCI expansion cards in modern server motherboards lacking native PCI connectors.

Verify cable length and slot clearance

Before ordering, confirm which of the two available ribbon cable lengths — 9 cm or 13 cm — reaches from the motherboard PCIe x1 slot to the target chassis opening. The mounting position of the riser bracket depends entirely on the chosen cable length, so measure the internal routing path to ensure the bracket aligns with a free rear slot.

EMI shielded ribbon cable

The bundled ribbon cable carries PCIe x1 signals to the PCI connector while providing electromagnetic interference shielding. Selecting the shorter or longer cable changes the physical placement of the PCI slot in the chassis, allowing the installer to match different server form factors without modifying the motherboard.

Highlights

  • RoHS compliant design meets environmental standards
  • PCIe x1 to PCI conversion extends legacy card support
  • Optional 9cm or 13cm EMI shielded cable suits chassis layout
  • Riser card format enables flexible motherboard slot positioning
  • New condition ensures reliable server accessory performance

Specifications

BrandiStarUSA
ModelDD-631-CX
TypeRiser Card
SpecificationsRoHS Compliance Version: Yes
Standard Drive Bays: None
MB Slot Position: depends on riser card cable length
FeaturesOptional with cable length 9,13cm selection
Shipping weight1.36 kg
Package size152 × 76 × 51 mm

Questions about this item

What cable lengths are available for the DD-631-CX riser card?

The riser card is offered with an EMI shielded ribbon cable in either a 9 cm or 13 cm length option.

Which cable length should I choose for my server chassis?

Select the 9 cm cable for tight 1U spaces or the 13 cm cable when the PCI slot sits further from the motherboard.

Does the riser card support full PCIe x1 bandwidth after installation?

Yes, the x1 edge connector passes a single PCIe lane through the shielded ribbon to the PCI slot without signal conversion.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.