iStarUSA Inc.
iStarUSA Inc. D-260HNBL-C246-1 2U barebone server
2U rackmount barebone with six hot-swap 3.5" bays, Intel C246 chipset, LGA 1151 socket for Xeon E-2100 CPUs, four DDR4 slots up to 64 GB ECC, eight SATA 600 ports, three PCIe 3.0 slots.
- Form Factor2U Rackmount
- MaterialZinc-Coated Steel
- WorkloadEdge Server
- CPU TypeSupports Intel Xeon E-2100 Processors
- CPU SocketLGA 1151
- North BridgeIntel C246
- Supports Xeon E-2100 CPUs via LGA 1151 socket
- Dual-channel DDR4 ECC memory up to 64 GB
- Six trayless hot-swap 3.5 inch drive bays
- Three PCIe 3.0 expansion slots for add-in cards
- Dual Intel Gigabit LAN with i210 and I219LM controllers
Edge server barebone
This 2U rackmount barebone is built for edge deployments that need dense storage and Intel Xeon E-2100 processing. It targets system integrators and IT teams assembling custom appliances without starting from a blank chassis.
Capacity and headroom
Four 288-pin slots accept DDR4 2400 or 2666 ECC and non-ECC UDIMMs up to 64 GB total in dual-channel mode. Six trayless hot-swap 3.5-inch bays plus one fixed 3.5-inch bay provide eight SATA 600 ports, while expansion stops at one PCIe 3.0 x16, one x8 and one x4 slot.
Bundled impact
The included 500 W single power supply and zinc-coated steel frame deliver the mechanical and electrical baseline so integrators only add CPU, memory and drives. Rear I/O supplies dual Intel gigabit LAN, four USB 3.0 ports, VGA, HDMI, DisplayPort and a COM port for headless management.
Highlights
- Supports Xeon E-2100 CPUs via LGA 1151 socket
- Dual-channel DDR4 ECC memory up to 64 GB
- Six trayless hot-swap 3.5 inch drive bays
- Three PCIe 3.0 expansion slots for add-in cards
- Dual Intel Gigabit LAN with i210 and I219LM controllers
Specifications
| Brand | iStarUSA |
|---|---|
| Model | D-260HNBL-C246-1 |
| Form Factor | 2U Rackmount |
| Material | Zinc-Coated Steel |
| Workload | Edge Server |
| CPU Type | Supports Intel Xeon E-2100 Processors |
| CPU Socket | LGA 1151 |
| North Bridge | Intel C246 |
| Memory Slots | 4 x 288Pin |
| Installed Memory Size | No Memory Installed |
| Max Memory Supported | 64GB |
| Channel Supported | Dual Channel |
| ECC Supported | Yes |
| Registered | No |
| Serial ATA | 8 x SATA 600 |
| PCI Express | 1 x PCIe 3.0 x16 1 x PCIe 3.0 x8 1 x PCIe 3.0 x4 |
| First LAN | 2 x RJ45 GLAN by Intel® i210&I219LM |
| Max. LAN Speed | 1 Gigabit |
| 3.5" Bays | 1 |
| Hot-Swap Bays | 6 |
| COM | 1 |
| VGA | 1 |
| Rear USB | 4 x USB 3.0 |
| RJ45 | 2 |
| Other Ports | 1 x HDMI, 1 x DisplayPort |
| Max. Power | 500W Single |
| Features | 2U Rackmount with 500W PSU 6 x 3.5" Trayless Hot-Swappable Drive Bays Supports Intel Xeon E-2100 Processors Supports Dual channel DDR4 2666/2400 ECC and non-ECC U DIMM max 64 GB Support 8x SATA3 by C246 Supports 1x PCIe 3.0 x16, 1x PCIe 3.0 x8, 1x PCIe 3.0 x4 Supports Intel i210&i219LM Supoorts 4 x Half Height Expansion Slot |
| Dimensions | 3.48" x 20.66" x 19.00" |
| Weight | 30.00 lbs. |
| Shipping weight | 15.88 kg |
| Package size | 610 × 584 × 203 mm |
Questions about this item
Will my existing DDR4 2666 ECC UDIMMs work in the four 288-pin slots of this D-260HNBL-C246-1 barebone?
Yes, the board supports dual-channel DDR4 2666/2400 ECC and non-ECC UDIMMs up to 64 GB across the four 288-pin slots.
How can I verify the dual Intel i210 and I219LM gigabit ports are operating at full 1 Gbps after installation?
Check the link LEDs on each RJ45 port and confirm 1 Gbps full-duplex in the OS network adapter settings or switch port status.
Which components are included and which must be purchased separately for this 2U rackmount barebone?
The chassis, C246 motherboard, 500 W PSU, six 3.5" hot-swap trays, one fixed 3.5" bay, and rear I/O panel are included; CPU, memory, drives and rails are not.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



