We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow singlemode duplex fiber patch cable with LC connectors, 20 m length, 2.0 mm jacket, G.657.A1 bend insensitive

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF LC/LC 20 m Yellow 9/125 µm G.657.A1

SKU CH-8PEV-1WT56

A 20 metre singlemode duplex patch cable with LC/UPC connectors, bend-insensitive G.657.A1 fibre and Corning glass for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length20 m
  • ColorYellow
  • ShieldedNo
  • Bend-insensitive G.657.A1 fiber reduces loss on tight bends
  • Corning ultra-pure glass core delivers low attenuation
  • UPC-polished LC connectors improve return loss performance
  • OS2 single-mode 9/125 µm supports 40 GbE and beyond
  • 20 m yellow duplex patch cable for indoor riser runs

Singlemode Duplex Patch Cable 20 m

This 20 m singlemode duplex patch cable uses OS2 fiber with LC/UPC connectors on both ends. It is built for high-speed links in data centres, telecom rooms and desk-side connections. The yellow jacket identifies the singlemode construction at a glance. Corning ultra-pure glass keeps attenuation low over long runs.

Bend-Insensitive G.657.A1 Fiber

The G.657.A1 bend-insensitive design reduces loss when the cable is routed around tight corners or through dense patch panels. This makes upgrades in crowded racks simpler than with standard singlemode fiber that cannot tolerate sharp bends. Installers gain flexibility without sacrificing the 40G Ethernet performance envelope.

Sustained Low-Loss Transmission

Low signal loss and high data rates are maintained under continuous load thanks to the 9/125 µm core and UPC polish. Each unit ships with a factory test report verifying the measured attenuation. The OFNR-rated jacket meets riser safety requirements for permanent indoor installation.

Highlights

  • Bend-insensitive G.657.A1 fiber reduces loss on tight bends
  • Corning ultra-pure glass core delivers low attenuation
  • UPC-polished LC connectors improve return loss performance
  • OS2 single-mode 9/125 µm supports 40 GbE and beyond
  • 20 m yellow duplex patch cable for indoor riser runs

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length20 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

What size LC duplex adapter or patch panel port does the 2.0 mm cable need to fit?

The 2.0 mm duplex jacket fits standard LC duplex cut-outs and patch panel ports designed for 2 mm zipcord cables.

How do I install the LC/UPC connectors without damaging the ceramic ferrules?

Remove the dust caps, align the keyed LC connector with the adapter, and push straight in until it clicks; never twist or force the ferrule end-face.

When should I replace the cable if the bend-insensitive G.657.A1 fiber is stressed repeatedly?

Replace it if insertion loss rises above your link budget or if the end-face shows scratches or contamination that cleaning cannot remove.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.