We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fibre patch cable with LC connectors, 0.5 m long, 2.0 mm jacket, G.657.A1 bend-insensitive

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF LC-LC 0.5 m Yellow 9/125 µm G.657.A1

SKU CH-1MVC-DDBRG

Singlemode duplex patch cable with bend-insensitive G.657.A1 fiber, LC UPC connectors, 0.5 m length, rated for 40G Ethernet

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length0.5 m
  • ColorYellow
  • ShieldedNo
  • Ideal for data-centre and desk interconnects
  • UPC polish gives lower return loss
  • OS2 single-mode fibre supports 40G Ethernet
  • Bend-insensitive G.657.A1 design reduces bend loss
  • Corning ultra-pure glass ensures low attenuation

Singlemode Duplex Patch Cable

This 0.5 metre singlemode duplex patch cable uses OS2 fibre with LC/UPC connectors at both ends. It is built for interconnect and cross-connect work in entrance facilities, telecom rooms, data centres and desk-side links. The yellow jacket identifies the singlemode run at a glance. Each unit ships with a factory test report confirming the link budget.

Bend Insensitive G.657.A1 Fibre

The cable uses Corning ultra-pure glass built to the G.657.A1 bend-insensitive standard, so tight bends in dense patch panels or cabinet routing do not add measurable attenuation. That characteristic replaces legacy singlemode leads that would lose signal when bent around cable managers. The upgrade is worth it whenever the pathway forces a radius below the traditional limit.

LC/UPC Connectors and 2.0 mm Jacket

Dual LC/UPC ferrules give a superior surface finish for lower return loss on high-speed links such as 40G Ethernet. The 2.0 mm duplex zipcord jacket is OFNR rated for in-building riser runs and strips easily with standard tools. No polishing or epoxy is required on site, freeing technician time for termination-heavy projects.

Highlights

  • Ideal for data-centre and desk interconnects
  • UPC polish gives lower return loss
  • OS2 single-mode fibre supports 40G Ethernet
  • Bend-insensitive G.657.A1 design reduces bend loss
  • Corning ultra-pure glass ensures low attenuation

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length0.5 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

What connector spacing does the 2.0 mm duplex jacket need to fit my patch panel?

The 2.0 mm duplex jacket uses standard LC duplex spacing so it plugs straight into any LC duplex transceiver or patch-panel port without an adapter.

Which cleaning step is often skipped when installing the LC UPC connectors?

Clean both ferrule end-faces with a lint-free wipe and isopropyl alcohol before mating; skipping this leaves dust that degrades return loss on the UPC polish.

How often should I re-inspect the bend-insensitive G.657.A1 fiber after installation?

Inspect the end-faces and run an OTDR trace after any re-routing or macrobend event; the G.657.A1 fiber tolerates tight bends but connector contamination still causes loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.