We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC UPC connectors, 1 m length, 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC UPC Aqua 1 m 50/125 µm BIMMF 2.0 mm OFNR

SKU CH-0H2E-6X170

A 1 m duplex LC/LC OM4 multimode patch cable with 50/125 µm bend-insensitive fiber and UPC connectors for 10, 40 and 100 G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length1 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode supports 10G, 40G and 100G Ethernet speeds
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • UPC connectors provide superior surface finish and improved return loss
  • Corning ultra-pure glass fiber delivers low attenuation and high bandwidth
  • Each cable includes a test report for verified performance

Versatile Connectivity for Data Centres

This Intellinet OM4 multimode duplex patch cable uses LC/UPC connectors on both ends. It is built for interconnect and cross-connect work in entrance facilities, telecommunications rooms and data centres. The aqua jacket identifies the OM4 grade at a glance.

Sustained High-Speed Transmission

Corning ultra-pure glass fibre delivers low attenuation and high bandwidth for 10, 40 and 100 Gigabit Ethernet links. Bend-insensitive multimode fibre reduces loss when the cable is routed around tight corners, keeping signal quality stable over the full 1 metre run.

Straightforward LC Installation

Push-pull LC connectors seat with a click and release with a latch press, so no tools are required. The 2.0 mm duplex jacket is pliable enough for dense patch panels but stiff enough to avoid kinking. Each cable ships with its factory test report for immediate verification.

Highlights

  • OM4 multimode supports 10G, 40G and 100G Ethernet speeds
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • UPC connectors provide superior surface finish and improved return loss
  • Corning ultra-pure glass fiber delivers low attenuation and high bandwidth
  • Each cable includes a test report for verified performance

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length1 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Does the 2.0 mm duplex jacket generate noticeable heat or require extra power during continuous 40G Ethernet runs?

No, the passive OM4 multimode fiber carries light signals without active components, so it produces no heat and draws no power regardless of 10G, 40G or 100G data rates.

What transceiver modules must already be installed in my switches for this LC/UPC patch cord to work?

You need SFP+ or QSFP+ transceivers with LC duplex receptacles that support OM4 50/125 µm multimode fiber at the desired 10G, 40G or 100G speed.

Will the bend-insensitive 50/125 µm core mate reliably with legacy OM3 or OM2 patch panels I still use?

Yes, the OM4 fiber is backward-compatible with OM3 and OM2 50/125 µm infrastructure, and the UPC polish ensures low return loss across mixed-generation links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.