We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC UPC connectors on both ends, 3 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC UPC 3 m Aqua 50/125 µm BIMMF 2.0 mm OFNR

SKU CH-MK50-XR0EF

A 3 m aqua duplex LC/LC patch cable with OM4 50/125 µm bend-insensitive multimode fiber for 10, 40 and 100 G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length3 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode fibre supports 10, 40 and 100 GbE speeds
  • Bend-insensitive design reduces loss when cables are twisted or bent
  • UPC connectors give better surface finish and lower return loss
  • Corning ultra-pure glass core delivers low attenuation and high bandwidth
  • 3 m aqua duplex patch cord with LC/LC ends for data-centre cross-connects

Enterprise-Grade OM4 Duplex Patch Cable

This 3 m LC/LC duplex patch cable uses OM4 multimode fiber with a 50/125 µm core/cladding and UPC connectors for low return loss. It is built for interconnect and cross-connect work in entrance facilities, telecommunications rooms and data centers. The aqua jacket identifies the OM4 rating at a glance.

Bend-Insensitive Fiber Reduces Installation Loss

Corning ultra-pure glass and bend-insensitive multimode fiber technology limit attenuation when the cable is routed around tight corners or through dense panels. The 2.0 mm OFNR-rated jacket meets riser flame requirements without adding bulk. Each unit ships with its own factory test report confirming insertion loss and return loss figures.

Test Report and Lifetime Warranty Simplify

The included test report lets installers verify link budgets immediately instead of waiting for a separate certification step. Lifetime warranty coverage removes the need to track separate spares contracts for patch leads. The cable supports 10 G, 40 G and 100 G Ethernet speeds over short to medium distances in enterprise and data-center environments.

Highlights

  • OM4 multimode fibre supports 10, 40 and 100 GbE speeds
  • Bend-insensitive design reduces loss when cables are twisted or bent
  • UPC connectors give better surface finish and lower return loss
  • Corning ultra-pure glass core delivers low attenuation and high bandwidth
  • 3 m aqua duplex patch cord with LC/LC ends for data-centre cross-connects

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length3 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

How do I install the LC UPC connectors without damaging the ferrules?

Clean each ferrule with a lint-free wipe and isopropyl alcohol before inserting, push straight in until the latch clicks, and avoid twisting the 2.0 mm jacket during routing.

What maintenance will this OM4 duplex patch cord need over time?

Re-inspect and clean the LC ferrules whenever you re-patch, verify the aqua jacket shows no kinks tighter than the bend-insensitive radius, and keep the original test report for future loss comparison.

At what bandwidth limit does this 50/125 µm cable saturate first in sustained 40G or 100G runs?

The OM4 multimode fiber is rated for 40G and 100G Ethernet over short to medium distances, so the modal dispersion of the 50/125 µm core becomes the limiting factor before connector loss does.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.