We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC connectors both ends, 4 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/LC 4 m Aqua Blue 50/125 µm BIMMF UPC

SKU CH-65W9-N3PEF

OM4 multimode duplex fiber patch cable with LC/UPC connectors, 4 m aqua blue jacket, bend-insensitive 50/125 µm Corning glass for 40G and 100G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length4 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode fiber supports 10G, 40G and 100G Ethernet speeds
  • UPC connectors provide improved return loss for better signal quality
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • Includes test report verifying performance for each cable

4 m OM4 Duplex LC/LC Patch Cable

This 4 metre OM4 multimode duplex patch cable uses LC/UPC connectors on both ends. It is built with 50/125 µm bend-insensitive Corning glass fibre in an aqua jacket rated OFNR. The cable ships with a factory test report and carries a lifetime warranty.

Suits 10G 40G 100G Short Links

The OM4 rating supports 10G 40G and 100G Ethernet over short to medium distances in data centres and telecom rooms. Buyers needing single-mode reach or a different connector polish such as APC should select another cable type.

Simple Plug-In Install

LC connectors snap into compatible transceivers or patch panels without tools. The bend-insensitive design reduces attenuation when the cable is routed around tight corners. Dirty or damaged end-faces are the most common cause of excess loss so clean connectors before mating.

Highlights

  • OM4 multimode fiber supports 10G, 40G and 100G Ethernet speeds
  • UPC connectors provide improved return loss for better signal quality
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • Includes test report verifying performance for each cable

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BLC
Length4 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Which transceivers or switch ports must I already have to use the LC duplex connectors on this 4 m OM4 cable?

You need matching LC duplex transceivers or switch ports that accept 50/125 µm multimode fiber; the cable plugs directly into those LC interfaces.

Can I mix this bend-insensitive OM4 cable with existing OM3 or OM2 patch cords in the same link?

Yes, the 50/125 µm core matches OM3 and OM2, so you can combine them, but the overall link budget will be limited by the lowest-grade segment.

How do I verify the cable is performing correctly after installation?

Each unit ships with a factory test report; compare the measured insertion loss and return loss on that report against your link-loss budget to confirm performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.