We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ultra-thin Cat6 Ethernet cable, 14 ft, RJ45 connectors, snag-free boots

Intellinet Network Solutions

Intellinet Network Solutions Cat6 U/UTP Slim Patch Cable 14 ft Black 10G 250 MHz 30 AWG

SKU CH-1SHC-SWK27

A 14 ft Cat6 U/UTP slim patch cable supporting 10 Gbps at 250 MHz with 30 AWG stranded copper, snag-free boots and gold-plated RJ45 contacts for dense installations and PoE++ applications

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length14 ft.
  • ColorBlack
  • 10 Gbps bandwidth at 250 MHz for high-speed networking
  • 100 % pure copper conductors ensure reliable PoE++ power delivery
  • 30 AWG ultra-slim profile simplifies routing in tight cabinets
  • Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
  • Snag-free boots protect connectors during frequent patching

Intended use and installation context

This Cat6 patch cord is built for 10 Gbps links at 250 MHz and carries PoE++ power up to IEEE802.3bt. The 14 ft length suits rack-to-patch-panel runs or desktop drops in offices and data cabinets. Pure bare copper conductors and gold-plated contacts meet ISO/IEC 11801 and EN 50288 requirements for permanent link certification.

Sustained throughput and PoE handling

Stranded 30 AWG conductors maintain signal integrity over the full 14 ft during continuous 10 Gbps traffic without the degradation seen on thinner gauge alternatives. The cable supports all four-pair PoE classes up to Ultra PoE, so connected access points, cameras or LED lighting draw full power without voltage drop or conductor heating.

Thermal behaviour and cable management

The ultra-thin U/UTP jacket reduces bundle diameter, improving airflow around active equipment in dense cabinets and lowering localized heat build-up. Snag-free boots and heavy-duty strain relief protect the RJ45 latch during repeated moves, while the flexible stranded core eases routing around 45-degree corners without kinking.

Highlights

  • 10 Gbps bandwidth at 250 MHz for high-speed networking
  • 100 % pure copper conductors ensure reliable PoE++ power delivery
  • 30 AWG ultra-slim profile simplifies routing in tight cabinets
  • Gold-plated RJ45 contacts resist corrosion for lasting signal integrity
  • Snag-free boots protect connectors during frequent patching

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length14 ft.
ColorBlack
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

Does the 30 AWG slim cable run hotter or draw more power than a standard Cat6 patch cord during all-day 10 Gbps traffic?

No — the cable is passive copper and carries only the signal; power draw and heat are determined by the connected switch or NIC, not by the 30 AWG conductors themselves.

What must the buyer already own so the RJ45 connectors on this 14 ft cable will actually link up?

Any device with a standard RJ45 Ethernet port — switch, router, PC, NAS, IP camera, PoE injector, or similar — wired to either T568A or T568B pinout.

Will this Cat6 250 MHz cable work reliably when plugged into an older Cat5e patch panel and a 1 Gbps switch?

Yes — it is fully backward compatible; the link will simply negotiate at the highest speed both ends support, up to 1 Gbps on that hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.