We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin gray Cat6 Ethernet cable with RJ45 connectors, 10 ft long, snag-free boots

Intellinet Network Solutions

Intellinet Network Solutions Cat6 U/UTP Slim Network Ethernet Cable 10 ft Gray 30 AWG

SKU CH-PC3Z-1ACB1

A 10 ft Cat6 U/UTP slim patch cable with 30 AWG stranded copper conductors, gold-plated RJ45 contacts and snag-free boots for 250 MHz, 10G and PoE++ runs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorGray
  • Supports 10 Gbps at 250 MHz bandwidth
  • 100 % bare copper ensures maximum conductivity
  • Gold-plated contacts resist corrosion in any environment
  • Snag-free boots protect connectors during installation and removal
  • Ultra-thin 30 AWG design simplifies dense cable management

Ultra-thin Cat6 patch cable for dense installs

This 10 ft gray Cat6 U/UTP cable uses 30 AWG stranded conductors to achieve a much smaller diameter than standard patch cords. The slim profile improves airflow in crowded cabinets and eases routing around tight corners. It targets installers and network managers who need high-density cabling without sacrificing Cat6 performance.

10 Gbps at 250 MHz over unshielded copper

The cable meets ISO/IEC 11801 and EN 50288 Cat6 requirements, delivering 10 Gbps bandwidth at frequencies up to 250 MHz. Pure bare copper conductors ensure maximum conductivity, while gold-plated RJ45 contacts resist corrosion. Both T568A and T568B wiring schemes are supported for universal compatibility.

Snag-free boots and heavy-duty strain relief

Moulded snag-free boots protect the RJ45 locking tabs during pulls through conduit or cable trays, reducing connector damage. Heavy-duty strain relief absorbs bending stress at the termination point. The design suits PoE++ and Ultra PoE deployments up to IEEE 802.3bt, but buyers needing shielded cable for noisy environments should look elsewhere.

Highlights

  • Supports 10 Gbps at 250 MHz bandwidth
  • 100 % bare copper ensures maximum conductivity
  • Gold-plated contacts resist corrosion in any environment
  • Snag-free boots protect connectors during installation and removal
  • Ultra-thin 30 AWG design simplifies dense cable management

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorGray
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

What does 10 Gbps mean when the cable is plugged into a switch and a PC?

The cable supports up to 10 Gbps data rates at 250 MHz, matching Cat6 performance per ISO/IEC 11801 and EN 50288, so a 10 GbE port pair will negotiate full speed.

Which RJ45 wiring standard does the connector follow and what does that cap?

The plugs are colour-coded for both T568A and T568B, so the cable works with either pinout without limiting the 10 Gbps or 250 MHz rating.

How much space does the 30 AWG slim design need behind a patch panel or in a cabinet?

The ultra-thin stranded construction is considerably smaller than standard Cat6, improving airflow and flexibility for tight bends and dense cable runs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.