We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten green slim Cat6 patch cables with RJ45 connectors, one foot each

Intellinet Network Solutions

Intellinet Network Solutions Cat6 Slim Patch Cable 1 ft Green 10-Pack 30 AWG

SKU CH-3TBF-9B6WA

A 10-pack of 1 ft Cat6 slim cables rated for 10 Gbps at 250 MHz with 30 AWG stranded copper and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGreen
  • Supports 10 Gbps at 250 MHz bandwidth
  • 100 % bare copper for reliable PoE++ delivery
  • Gold-plated contacts resist corrosion in every environment
  • Snag-free boots protect RJ45 clips during dense pulls
  • Ultra-slim 30 AWG design eases routing in tight racks

Slim Cat6 10-Pack for Dense Installations

This ten-pack of green Cat6 patch cables uses an ultra-thin 30 AWG stranded design that reduces bulk in crowded cabinets and tight routing paths. The slim profile improves airflow around active equipment and eases installation around corners. Each cable is one foot long and terminated with RJ45 connectors on both ends. They suit installers who need many short links in high-density racks or patch panels.

Thermals Noise and Power

As passive copper cables they generate no heat and produce no audible noise. The 100 percent bare copper conductors and gold-plated contacts maintain low resistance for efficient power delivery. They support all PoE standards up to IEEE 802.3bt including PoE++ and 4PPoE without active cooling requirements. The snag-free boots protect the connectors during frequent moves in live environments.

250 MHz 10G Certified Performance

Each cable meets Cat6 specifications at 250 MHz and is rated for 10 Gbps transmission in accordance with ISO/IEC 11801 and EN 50288. The T568A and T568B color-coded wiring ensures compatibility with standard termination schemes. Buyers who require shielded construction or longer individual lengths should consider other options.

Highlights

  • Supports 10 Gbps at 250 MHz bandwidth
  • 100 % bare copper for reliable PoE++ delivery
  • Gold-plated contacts resist corrosion in every environment
  • Snag-free boots protect RJ45 clips during dense pulls
  • Ultra-slim 30 AWG design eases routing in tight racks

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable - Multi-Pack
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGreen
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Gold-plated Contacts, 10-Pack

Questions about this item

How do I plug the RJ45 connectors into a patch panel without damaging the snag-free boots?

Align each connector with the T568A or T568B colour code, press straight in until the latch clicks, then pull gently on the boot — not the cable — to seat it fully.

When should I replace a cable from this 10-pack if PoE++ is running continuously?

Replace any cable that shows kinked 30 AWG conductors, discoloured gold-plated contacts or intermittent 10 Gbps link errors during sustained PoE++ loads.

What length or bandwidth limit appears first when all ten 1 ft cables carry 10 Gbps traffic simultaneously?

The 250 MHz Cat6 rating and 1 ft length keep attenuation negligible; the practical limit is the switch port density and total PoE++ power budget, not the cables themselves.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.