We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 3 ft Cat6a S/FTP patch cable with snag-free RJ45 connectors

Intellinet Network Solutions

Intellinet Cat6a S/FTP Network Ethernet Cable 3 ft White

SKU CH-64YD-TA5KK

A 3 ft white Cat6a patch cable with S/FTP shielding, 100% copper conductors and gold-plated RJ45 connectors for 10 Gbps and PoE++ links

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorWhite
  • Supports 10 Gbps at 500 MHz bandwidth
  • S/FTP shielding with aluminum braid and foil per pair
  • 100 % pure bare copper conductors for reliable conductivity
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion
  • Snag-free boots protect connectors during installation and removal

3 ft Cat6a S/FTP patch cable

This three-foot white patch cable is built to the Cat6a Class EA standard with S/FTP shielding and 100 percent bare copper conductors. It terminates in RJ45 plugs on both ends and carries gold-plated contacts rated at 50 micro-inches for corrosion resistance. The stranded 26 AWG construction keeps the cord flexible for desk or patch-panel runs. Snag-free boots protect the latches during repeated insertion and removal.

Check connector and wiring scheme

Verify that your switch, router or wall jack uses standard RJ45 ports wired to either the T568A or T568B pin-out; this cable is colour-coded for both. Confirm the equipment supports 10 Gbps signalling at up to 500 MHz so the cable’s certified bandwidth is fully utilised. Ensure the power sourcing device complies with IEEE 802.3bt if you plan to deliver PoE++ over the link. The three-foot length limits placement to adjacent devices or inside a single rack.

Suited for short high-speed links

Network administrators who need a short, fully shielded Cat6a jumper for 10GBase-T, HDBaseT or PoE++ connections will find the cable fits the task. Installers requiring longer runs, different colours, solid-core cable for in-wall work or unshielded UTP designs should select a different product. Buyers needing fibre-optic links or legacy Cat5e performance are outside this cable’s intended use.

Highlights

  • Supports 10 Gbps at 500 MHz bandwidth
  • S/FTP shielding with aluminum braid and foil per pair
  • 100 % pure bare copper conductors for reliable conductivity
  • 50 micro-inch gold-plated RJ45 contacts resist corrosion
  • Snag-free boots protect connectors during installation and removal

Specifications

BrandIntellinet Network Solutions
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorWhite
ShieldedYes

Questions about this item

Does the 3 ft white Cat6a patch cable ship with any extra connectors or mounting hardware, or is it just the cable with RJ45 ends?

The cable arrives ready to use with RJ45 connectors on both ends; no additional connectors, clips or mounting hardware are included.

Should I choose a different length or shield type for a 10 Gbps PoE++ run, or is this 3 ft S/FTP version sufficient?

This 3 ft S/FTP cable is certified for 10 Gbps at 500 MHz and supports PoE++ up to IEEE 802.3bt, so it meets the requirement for short runs.

What does the 500 MHz rating actually deliver when the cable is plugged into a 10GBase-T switch and a desktop NIC?

The 500 MHz bandwidth enables full 10 Gbps throughput over the 3 ft link, with S/FTP shielding keeping crosstalk low enough for reliable 10GBase-T operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.