Innovation First, Inc.
Innovation First, Inc. 1USHL-115 server accessory sliding rack mount shelf 1U 19" 28" deep 110 lb
A sliding 1U shelf fits 19-inch racks, extends 28 inches deep and holds 110 lb of equipment
- TypeHome and Garden
- FeaturesCompatibility: Rack Type: 4 Post 19" Rack (Server Racks, Equ
- Supports 110 lb load for heavy tower servers
- 7" wide shelf fits standard 19" rack width
- 28" deep surface accommodates full-depth equipment
- Ball-bearing slide rails extend fully for rear access
- Adjustable 15.5–31.5" mounting depth fits varied cabinets
What this shelf does
The 1USHL-115 is a 1U sliding rack mount shelf that fits 19" four-post server, equipment, cabinet and open-frame racks. It holds servers, desktops or tower units and supports up to 110 lb of equipment. The shelf measures 17.7" wide by 28" deep and includes cable management arms plus front and rear anti-slide bars with anti-slip surfaces. Ball-bearing slide rails provide smooth extension for access to installed gear.
Mounting depth range
This shelf mounts in racks with an adjustable depth range of 15.5" to 31.5" (394-800 mm). The rails attach to square-hole rack posts and accommodate a wide variety of cabinet depths. If your rack falls outside this range the shelf will not install correctly. No other mounting standard or hole pattern is supported by the supplied hardware.
Thermals and power
The shelf is a passive mechanical accessory with no fans, power supply or active cooling components. It adds no electrical load and generates no audible noise during operation. Airflow through the rack is unaffected by the shelf itself; thermal performance depends entirely on the equipment placed on it and the rack's own ventilation design.
Highlights
- Supports 110 lb load for heavy tower servers
- 7" wide shelf fits standard 19" rack width
- 28" deep surface accommodates full-depth equipment
- Ball-bearing slide rails extend fully for rear access
- Adjustable 15.5–31.5" mounting depth fits varied cabinets
Specifications
| Brand | Innovation First |
|---|---|
| Model | 1USHL-115 |
| Type | Home and Garden |
| Features | Compatibility: Rack Type: 4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks) Rack Depth: Mounting depth range is 15.5" to 31.5" deep (394-800mm) Square Hole Racks: Compatible with the industry standard 3/8" (10mm) square hole racks Rack manufacturers including Dell, HP-Compaq, IBM, APC, etc. Cage nuts included for square hole mounting Round Hole Racks: Compatible with all standard round (non-threaded) holes Rack manufacturers including HP and IBM Threaded Racks: Compatible with all standard threads including 10-32, 12-24, and Metric M6. Rack manufact |
| Shipping weight | 8.62 kg |
| Package size | 819 × 559 × 64 mm |
Questions about this item
How much weight can the 110 lb rating actually hold on a 1U shelf?
The shelf is rated for 110 lb distributed load, so a fully populated 1U server or tower conversion up to that weight will be supported without sagging.
What does the 15.5" to 31.5" mounting depth range mean for my 19" rack?
The sliding rails adjust between 15.5" and 31.5" deep, letting the 28" deep shelf fit standard 19" four-post racks with varying post spacing.
Will the 17.7" wide shelf fit my 19" rack and how does it mount?
The 17.7" wide tray sits between standard 19" rack posts and uses square-hole compatible brackets; anti-slide bars and cable arms are included for secure mounting.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Western Digital
Western Digital SDPHK2H-024T-NBAAD 24TB G-RAID PROJECT 2 raid enclosure
$1,209.99
0.01394126BTC
In stock