IMIYORE DC5.5x2.1mm 18AWG 78in 2pcs computer power extension cord
A 78-inch male-to-male DC cable with 5.5x2.1mm connectors extends 12V power for CCTV, LED strips and routers
- TypeConnecting and powering electronic devices, extending signal
- ColorBlack
- Length78 inches
- Connector Number4
- Connector DetailAuxiliary, Male-to-Male
- Terminal GenderMale to Male
- Extends power reach with 78-inch cable length
- Supports up to 10A current for stable delivery
- Oxygen-free copper core ensures low resistance
- Shock-resistant PVC jacket protects against damage
- Compatible with 5.5×2.1mm DC devices
DC 5.5×2.1 mm male-to-male extension cable
This pair of 78-inch cords extends the reach of 12 V DC power supplies that use a 5.5 mm by 2.1 mm barrel connector. Each cable is built with 18 AWG oxygen-free copper conductors inside a frost-resistant, pull-resistant PVC jacket rated for continuous use up to 36 V. The male-to-male design suits CCTV cameras, LED strips, routers, printers and similar low-voltage gear.
Current capacity and voltage headroom
The assembly is specified for 1 A to 10 A loads across a 1 V to 36 V range, with 12 V and 24 V being the most common operating points. At the top end of that current band the 18 AWG conductors will warm noticeably, so sustained draws near 10 A should be kept as short as practical. The PVC insulation remains flexible down to freezing temperatures but is not rated for high-voltage AC mains.
Barrel-connector interface limits
The 5.5 mm × 2.1 mm centre-positive barrel is a de-facto standard for 5 V–24 V DC equipment, yet pin diameter and sleeve length can vary between manufacturers. A loose or oversized mating jack will cause intermittent contact and voltage drop under load. The cable must not be used beyond its 36 V DC rating or in any AC mains circuit, and polarity must match the device requirement before connection.
Highlights
- Extends power reach with 78-inch cable length
- Supports up to 10A current for stable delivery
- Oxygen-free copper core ensures low resistance
- Shock-resistant PVC jacket protects against damage
- Compatible with 5.5×2.1mm DC devices
Specifications
| Brand | IMIYORE |
|---|---|
| Model | GDG2 |
| Type | Connecting and powering electronic devices, extending signal transmission range, facilitating data transfer, Auxiliary, Male-to-Male |
| Color | Black |
| Length | 78 inches |
| Connector Number | 4 |
| Connector Detail | Auxiliary, Male-to-Male |
| Terminal Gender | Male to Male |
| Wire Gauge | DC Cable |
| Shielding | Shock Resistant |
| Conductor | PVC |
| Construction | PVC |
| Features | Shock Resistant, Connecting and powering electronic devices, extending signal transmission range, facilitating data transfer |
Questions about this item
Will this 5.5mm x 2.1mm male-to-male cable work with my existing 12V CCTV camera and LED strip?
Yes, the 5.5x2.1mm connectors match those devices and the cable supports 12V DC with up to 10A current capacity.
How can I verify the extension is delivering stable power after connecting it?
Check that your device powers on normally and operates without voltage drop; the oxygen-free copper core and 18AWG gauge are designed for low resistance.
What comes in the package and do I need any extra adapters?
The box contains two 78-inch black male-to-male DC extension cords with 5521 connectors; no extra adapters are required if your gear uses 5.5x2.1mm ports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



