We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short grey stacking cable with connectors at both ends

HPE

HPE J9734A 2920 Stacking Cable 0.5m

SKU CH-CVTX-PS7ND

Stacking cable links HP 2920 switches at 1.64 ft with HCRP and SPP protocols

  • Device TypeTransceiver
  • ProtocolsHCRP, SPP
  • Connect HP 2920 switches with a dedicated 0.5 m stacking cable
  • Lightweight 0.62 lb design reduces rack strain
  • 64 ft length keeps adjacent ports tidy
  • Works with HP Color LaserJet 5500 series printers
  • HPE J9734A part ensures genuine compatibility

HPE J9734A Stacking Cable 0.5m

This 0.5 metre stacking cable connects compatible HPE 2920 switches into a single logical unit. It is built for network administrators who need resilient stacking links in a rack or cabinet.

Check switch model and port availability

Verify that each switch in the stack is an HP Baseline 2920 model with a free stacking port. The cable also lists compatibility with the HP Color LaserJet 5500 series printer, so confirm the target device before ordering.

Passive copper link with minimal power draw

As a passive copper assembly the cable adds no active heat or fan noise to the rack. It weighs approximately .62 lb and draws negligible power, leaving the switch power budget unaffected during normal operation.

Highlights

  • Connect HP 2920 switches with a dedicated 0.5 m stacking cable
  • Lightweight 0.62 lb design reduces rack strain
  • 64 ft length keeps adjacent ports tidy
  • Works with HP Color LaserJet 5500 series printers
  • HPE J9734A part ensures genuine compatibility

Specifications

BrandHPE
Device TypeTransceiver
ProtocolsHCRP, SPP

Questions about this item

Does the HPE J9734A stacking cable ship with any adapters or transceivers, or must they be purchased separately?

The cable is a single 0.5 m stacking assembly; no transceivers or adapters are included and must be sourced separately if required.

The listing shows only the 0.5 m length — are other lengths available under the same part number?

Part number J9734A identifies the 0.5 m stacking cable specifically; different lengths carry different HPE part numbers.

What does the 0.5 m length mean for rack-to-rack stacking of HP 2920 switches?

At 0.5 m the cable suits adjacent or same-rack 2920 units; longer runs need a longer HPE stacking cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.