We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green half-height PCIe card with two LC ports, 6.6 by 2.5 inches

HPE

HPE FC1242SRProduct 4 Gbit/s dual-channel Fibre Channel adapter

SKU CH-GFPS-12M0S MPN FC1242SRProduct

A dual-channel Fibre Channel host bus adapter with two LC ports supporting 4, 2 and 1 Gbit/s over multi-mode optical fibre via PCI Express

  • ColorGreen
  • Changer TypePower Adapter
  • Dual-channel connectivity with two LC ports for redundancy
  • 4 Gbit/s data transfer rate for fast storage access
  • PCI Express host interface for modern server compatibility
  • Half-height form factor fits space-constrained ProLiant servers
  • Multi-mode optical fibre support for flexible SAN deployment

Dual-Channel 4 Gbit/s Fibre Channel Adapter

The HPE StorageWorks FC1242SR is a half-height PCI Express host bus adapter with two LC ports for multi-mode optical fibre. It targets ProLiant servers that need direct connectivity to HPE StorageWorks arrays at 4, 2 or 1 Gbit/s speeds. The card fits standard low-profile slots and presents a green PCB.

Replaces Single-Channel or Slower HBAs

This adapter upgrades servers limited to one fibre link or to 2 Gbit/s throughput, doubling path redundancy and headroom for storage traffic. The jump is worth it when applications demand simultaneous access to multiple LUNs or when array firmware requires dual-path failover. It does not serve builds needing copper media or 8 Gbit/s and above.

Sustained Load Behaviour

Under continuous I/O the dual-channel design balances queue depth across both ports, preventing a single saturated link from stalling the host. Class 2 and Class 3 frame handling keeps fabric acknowledgements flowing without host CPU intervention. The half-height form factor limits airflow compared with full-height cards, so chassis cooling must handle the thermal load.

Highlights

  • Dual-channel connectivity with two LC ports for redundancy
  • 4 Gbit/s data transfer rate for fast storage access
  • PCI Express host interface for modern server compatibility
  • Half-height form factor fits space-constrained ProLiant servers
  • Multi-mode optical fibre support for flexible SAN deployment

Specifications

BrandHPE
ColorGreen
Changer TypePower Adapter

Questions about this item

Will this half-height HBA fit a 2.5-inch-wide low-profile PCIe slot?

The card measures 6.6 inches long by 2.5 inches wide and is a half-height design, so it fits standard low-profile PCIe slots that accept those dimensions.

How do I install the dual LC optical cables without damaging the transceiver ends?

Remove the dust caps, align each LC connector with its port on the bracket, and push straight in until the latch clicks; forcing at an angle can crack the ferrule.

When should the SFP transceivers be replaced in this FC1242SR adapter?

Replace the SFP modules if link errors rise, the optical power budget drops below spec, or a port fails to establish a 4 Gbit/s, 2 Gbit/s or 1 Gbit/s connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.