We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HANNORD SFF-8643 Mini SAS HD connector branching to four SATA connectors, 1.64ft cable

HANNORD

HANNORD SFF-8643 to 4 SATA Cable 1.64ft

SKU CH-4DRW-X71XJ

Connects a Mini SAS HD SFF-8643 host port to four SATA drives with labeled breakout cables and locking latches over 1.64 ft

  • TypeCable Connectors

Length 1.64 ft. (0.5m)

  • Connects RAID controller to four SATA drives via SFF-8643 host port
  • Labeled breakout ends simplify cable routing and drive identification
  • Locking latches on each connector prevent accidental disconnection
  • Built with UL-listed 12 Gb raw SAS cable for reliable throughput
  • 64 ft length fits compact server and workstation chassis

SFF-8643 to 4 SATA breakout cable

This HANNORD cable connects a Mini SAS HD SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. The 1.64ft length suits compact server or workstation chassis. Labeled breakout ends and locking latches simplify installation and keep connections secure.

Builders with SFF-8643 host ports needing SATA

Buyers whose backplane uses an SFF-8646 connector cannot use this cable. It is not a reversed cable, so systems requiring SATA host to SAS target wiring are not supported. Anyone needing longer reach or a different connector type should look elsewhere.

Four SATA III targets with 12Gb SAS raw cable rating

The assembly uses UL-listed 12Gb raw SAS cable and supports SATA I, II and III drives. Actual throughput depends on the host controller and the attached drives. The 15Gb-ready SFF-8643 interface provides headroom for future controller upgrades while the four 7-pin SATA connectors handle current storage arrays.

Highlights

  • Connects RAID controller to four SATA drives via SFF-8643 host port
  • Labeled breakout ends simplify cable routing and drive identification
  • Locking latches on each connector prevent accidental disconnection
  • Built with UL-listed 12 Gb raw SAS cable for reliable throughput
  • 64 ft length fits compact server and workstation chassis

Specifications

BrandHANNORD
ModelSFF-8643 to 4 Sata
TypeCable Connectors

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What controller port does the SFF-8643 end plug into?

The SFF-8643 end is the host connector and plugs into a Mini SAS HD port on a motherboard or RAID controller that specifically uses the SFF-8643 interface.

Will this cable work if my backplane uses an SFF-8646 connector?

No, the cable is designed for an SFF-8643 host port and will not function with an SFF-8646 backplane connector.

How can I verify the four SATA drives are communicating after connecting them?

The SATA connectors are labeled on the breakout; check that each drive appears in the RAID controller BIOS or operating system disk manager at the expected SATA I, II, or III speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.