We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided PWM fan splitter cable, 4-pin female to four male connectors, 10 inches

HANNORD

HANNORD PWM Fan Splitter 1-to-4 Braided 10 in

SKU CH-EPQ5-R09TT

Connects four case fans to one motherboard header using a 10-inch braided cable with one 4-pin and three 3-pin outputs

  • ColorBlack

Style 1 Pack

  • Connect four fans to one motherboard header
  • Braided sleeve protects wires and improves cable routing
  • One 4-pin and three 3-pin connectors for mixed fan support
  • Single tachometer line reports accurate RPM to the board
  • 10 inch length fits most desktop chassis layouts

PWM Fan Splitter 1-to-4 Braided 10 in

This HANNORD adapter splits one motherboard 4-pin header into four fan connections. It uses a black braided cable roughly 10 inches long with a single 4-pin female input and four male outputs. Builders who need extra case airflow from a single header will find it convenient.

Suits builders adding multiple fans to one header

The splitter carries only one RPM sense line, so only the fan on the 4-pin output reports speed to the motherboard. The other three 3-pin outputs run at the same PWM duty cycle without independent feedback. Systems that require per-fan speed monitoring or per-header current limits above what one header supplies should use a powered hub instead.

One 4-pin plus three 3-pin male connectors

Only the first male connector includes the yellow tachometer wire; the remaining three omit the RPM pin. This design lets the motherboard control all four fans from a single PWM signal while avoiding conflicting speed reports. Verify your header can deliver enough current for the total fan count before installing.

Highlights

  • Connect four fans to one motherboard header
  • Braided sleeve protects wires and improves cable routing
  • One 4-pin and three 3-pin connectors for mixed fan support
  • Single tachometer line reports accurate RPM to the board
  • 10 inch length fits most desktop chassis layouts

Specifications

ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard header do I need free to plug in this 4-pin female connector?

You need one standard 4-pin PWM fan header on the motherboard to accept the splitter's female connector.

Will my existing 3-pin case fans run at full speed or stay under PWM control when connected to the three 3-pin male ends?

The three 3-pin male connectors lack the RPM wire, so those fans receive voltage control from the header and run at the same speed as the single 4-pin fan.

How can I confirm the splitter is reporting a correct RPM signal to the motherboard after installation?

Enter the BIOS or use monitoring software and verify that one fan header shows a stable RPM reading matching the 4-pin fan's speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.