We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PWM fan splitter cable, 10.6 inch, 24AWG, one 4-pin to one 4-pin and one 3-pin connector

HANNORD

HANNORD PWM Fan Splitter 1-to-2 10.6 inch Black 24AWG internal power cable

SKU CH-XYEE-QJ5AD

A 10.6 inch black 24AWG splitter connects two PWM or 3-pin case fans to one motherboard header for synchronised speed control

  • ColorBlack

Style 1 Pack

  • Connects two PWM fans to one motherboard header for increased airflow
  • 4-pin main connector passes RPM signal to motherboard for synchronized speed control
  • 3-pin secondary connector runs slave fan at same speed as primary fan
  • Black 24AWG sleeved cable resists tangles and keeps the build tidy
  • 6 inch length fits standard case layouts without excess slack

What this cable does

The Hannord PWM fan splitter connects two case fans to a single motherboard fan header. One 4-pin receptacle accepts the motherboard PWM signal and distributes it to both fans. A second 3-pin connector allows a fan without PWM to run at the same speed as the primary fan. Builders who need independent speed control for each fan cannot use this adapter.

Thermals noise and power

The 24AWG wires carry the low current required by standard case fans without measurable voltage drop. Black sleeving keeps the cables tidy and reduces airflow obstruction inside the case. No active components are present, so the splitter adds no audible noise or heat of its own.

The deciding specification

Cable length is 10.6 inch from the motherboard header to the fan connectors. Measure your routing path before ordering; a shorter or longer run will require a different cable.

Highlights

  • Connects two PWM fans to one motherboard header for increased airflow
  • 4-pin main connector passes RPM signal to motherboard for synchronized speed control
  • 3-pin secondary connector runs slave fan at same speed as primary fan
  • Black 24AWG sleeved cable resists tangles and keeps the build tidy
  • 6 inch length fits standard case layouts without excess slack

Specifications

ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug this 10.6 inch splitter into a 4-pin motherboard header and both fans?

Connect the 4-pin receptacle to the motherboard header, the 4-pin fan to the main branch and the 3-pin fan to the slave branch; the 4-pin fan reports RPM so the board controls both speeds together.

Will the sleeved 24AWG wires or connectors wear out and need replacing?

The black sleeving is tangle-resistant and built for long-term use; under normal case temperatures the wires and crimps do not require scheduled replacement.

What limits how many of these splitters I can daisy-chain from one header?

The motherboard header’s current rating is the limiting factor; this splitter draws power for two fans through a single 24AWG feed, so total fan current must stay within the header’s spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.