GreenTechLLC
GreenTechLLC APCRBC154 12V 6AH UPS replacement battery
12V 6AH sealed lead-acid cartridge restores runtime to compatible APC Back-UPS 600, 650 and 675 models
- TypeBattery
- CompatibilityAPC BACK-UPS BE600M1, BE600M1-LM, BN600U1, BN650M1, BN675M1,
- Battery Voltage12V
- Battery Capacity6AH
- Dimension5.94" X 2.01" X 3.70"
- Weight5 LB
- Fits APC Back-UPS BE600M1, BE670M1, BN675M1 models
- Replaces OEM cartridge APCRBC154, RBC154, Battery Cartridge #154
- Delivers 12V 6AH capacity with F2 terminals
- Measures 5.94" x 2.01" x 3.70" for exact fit
- Tested before shipping to ensure reliable backup power
Drop-in replacement for APC Back-UPS models
The GreenTechLLC APCRBC154 is a 12 V, 6 Ah sealed lead-acid battery cartridge built to fit APC Back-UPS units including the BE600M1, BE670M1 and BN675M1 series. It matches the OEM RBC154 form factor and uses F2 terminals so installation requires no wiring changes. Home-office users and small-business IT staff can swap the cartridge in minutes and restore runtime without tools.
Sealed design runs cool and silent
Because the battery is a valve-regulated SLA unit, it produces no audible fan noise and generates only minimal heat during normal float charging or discharge cycles. The compact 5.94" x 2.01" x 3.70" footprint fits the existing UPS enclosure without blocking vents or adding measurable thermal load to the surrounding equipment rack or desk.
Restores original runtime for aging UPS units
This cartridge replaces a depleted RBC154 in the listed APC models, returning backup time to factory specifications for typical desktop, networking or point-of-sale loads. The upgrade is worthwhile when the UPS no longer holds charge through brief outages or when self-test alarms indicate end-of-life; it is not suited for users who need extended runtime beyond the original 6 Ah capacity or who require lithium chemistry.
Highlights
- Fits APC Back-UPS BE600M1, BE670M1, BN675M1 models
- Replaces OEM cartridge APCRBC154, RBC154, Battery Cartridge #154
- Delivers 12V 6AH capacity with F2 terminals
- Measures 5.94" x 2.01" x 3.70" for exact fit
- Tested before shipping to ensure reliable backup power
Specifications
| Brand | GreenTech |
|---|---|
| Model | APCRBC154, RBC154, Battery Cartridge #154 |
| Part Number | GTS-RBC154-12V6A |
| Type | Battery |
| Compatibility | APC BACK-UPS BE600M1, BE600M1-LM, BN600U1, BN650M1, BN675M1, BE670M1, BN650M1-CA, BN650M1S, BN650M1-TW, BN675M1 |
| Battery Voltage | 12V |
| Battery Capacity | 6AH |
| Dimension | 5.94" X 2.01" X 3.70" |
| Weight | 5 LB |
Questions about this item
How do I install the replacement battery and avoid the common mistake with the F2 terminals?
Remove the front panel of the UPS, disconnect the old cartridge, connect the new battery matching red to positive and black to negative on the F2 terminals, then secure the panel. The step people get wrong is reversing the polarity on the F2 connectors.
What maintenance or replacement will the 12V 6AH sealed lead-acid battery need later?
The sealed lead-acid battery requires no watering or electrolyte checks. Expect a service life of three to five years; replace the cartridge when runtime drops below 50% of the original 6AH capacity or the UPS signals a battery fault.
What limit appears first during a prolonged outage on the BE600M1 or BN675M1?
The 6AH capacity is the first limit. Under sustained load the battery will deplete before thermal or voltage cut-offs activate, typically providing minutes of runtime rather than hours depending on the connected equipment draw.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YOUHUA SATA Cable Kit 2×Data 0.48 m 2×Power 0.16 m
- Sata cables: 2 SATA…
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black



