GIGABYTE
GIGABYTE R112-X30 barebone server Xeon E-2300 1U 4-bay SATA
1U barebone server with Xeon E-2300 CPU, four 2.5-inch SATA bays and dual 1GbE LAN
- Intel Xeon E-2300 processor powers demanding workloads
- Single LGA 1200 socket simplifies CPU installation
- Dual-channel DDR4 ECC memory support protects data integrity
- Four 2.5-inch SATA bays enable flexible storage configuration
- Dedicated management port streamlines remote server administration
Compact 1U server for single-socket Xeon workloads
The GIGABYTE R112-X30 is a 1U barebones chassis designed around the Intel Xeon E-2300 processor in an LGA 1200 socket. It targets small-business IT, edge deployments and remote offices that need a rack-mountable platform with integrated management and direct-attached storage.
Steel chassis with front hot-swap and rear I/O
The unit provides two 2.5-inch SATA hot-swappable bays at the front and two additional internal 2.5-inch SATA bays for fixed drives. Dual 1 GbE LAN ports using the Intel I210-AT controller and a dedicated management port handle network and out-of-band access without extra cards.
Four DDR4 DIMM slots define memory ceiling
Four unbuffered DDR4 slots support dual-channel ECC or non-ECC memory, setting the practical RAM limit for the single Xeon E-2300 CPU. An M.2 slot with PCIe Gen3 x4 is available for a boot device, while the four SATA bays remain the only native mass-storage interfaces.
Highlights
- Intel Xeon E-2300 processor powers demanding workloads
- Single LGA 1200 socket simplifies CPU installation
- Dual-channel DDR4 ECC memory support protects data integrity
- Four 2.5-inch SATA bays enable flexible storage configuration
- Dedicated management port streamlines remote server administration
Specifications
No published specifications for this item yet.
Questions about this item
What does the PCIe Gen3 x4 M.2 interface cap in practice?
The M.2 slot runs at PCIe Gen3 x4, limiting sequential throughput to the bandwidth of four third-generation lanes.
What physical space must the chassis provide for the four drive bays?
The 1U chassis fits two 2.5" hot-swap bays at the front and two 2.5" internal bays behind them.
How is the Xeon E-2300 installed and which step is often missed?
Seat the LGA 1200 processor, lock the lever, then install the four DDR4 unbuffered DIMMs in the correct dual-channel slots.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



