GIGABYTE
GIGABYTE G293-Z41-AAP1 barebone server 24 DIMM 4 GPU
A 2U dual-socket server barebone supporting up to four dual-slot PCIe Gen5 GPUs, 24 DDR5 RDIMM slots, eight 2.5-inch hot-swappable drive bays and dual 10GbE LAN
- Dual AMD EPYC 9004 processors power demanding workloads
- 24 DDR5 RDIMM slots deliver 12-channel memory bandwidth
- Four dual-slot Gen5 GPUs accelerate AI and HPC tasks
- 5-inch hot-swap bays support NVMe, SATA and SAS drives
- Dual 10GbE LAN ports via Broadcom BCM57416 ensure fast networking
AMD EPYC 9004 dual-socket server barebones
This 2U barebones chassis is built for high-performance computing and AI workloads. It accepts two AMD EPYC 9004 series processors and provides twenty-four DDR5 RDIMM slots across twelve memory channels. The platform targets organisations that need dense GPU acceleration in a rack-mount form factor.
Four dual-slot Gen5 GPUs with PCIe switching
The system houses up to four dual-slot PCIe Gen5 GPUs connected through onboard PCIe switches, allowing full bandwidth to each accelerator. Four FHFL PCIe Gen5 x16 slots or eight x8 slots provide flexible GPU population. Dual 10Gb/s LAN ports via Broadcom BCM57416 handle cluster interconnect traffic.
Twenty-four DDR5 RDIMM slots in twelve channels
Memory capacity is defined by the twenty-four DIMM sockets organised in twelve channels per dual-processor configuration. This channel count and slot density determine the maximum memory bandwidth and total capacity available for GPU-fed workloads.
Highlights
- Dual AMD EPYC 9004 processors power demanding workloads
- 24 DDR5 RDIMM slots deliver 12-channel memory bandwidth
- Four dual-slot Gen5 GPUs accelerate AI and HPC tasks
- 5-inch hot-swap bays support NVMe, SATA and SAS drives
- Dual 10GbE LAN ports via Broadcom BCM57416 ensure fast networking
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the dual AMD EPYC 9004 processors and the 24 DDR5 RDIMMs without bending pins?
Align each EPYC 9004 CPU with the socket triangle marker, lower the carrier gently, and torque the retention screws in the prescribed cross pattern; then populate all 24 DDR5 RDIMM slots following the 12-channel sequence silk-screened on the board, pressing straight down until the ejector tabs click.
Which components will need replacement first under continuous HPC workloads?
The four dual-slot Gen5 GPUs and their PCIe switch assemblies run at the highest thermals, so their fans and thermal pads typically require inspection or swap before the EPYC 9004 CPUs or the DDR5 memory.
What throughput ceiling appears first when all four GPUs and the 10 Gb/s LAN ports run flat-out?
The dual BCM57416 10 Gb/s LAN ports saturate before the PCIe Gen5 x16 GPU links or the 12-channel DDR5 memory subsystem, making network bandwidth the first sustained-use bottleneck.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Western Digital SDPHK2H-024T-NBAAD 24TB G-RAID PROJECT 2 raid enclosure
OWC ThunderBlade X12 48TB RAID enclosure OWCTB5TBL12X048
- ThunderBlade X12 Ex…



