We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server chassis with two front drive bays

GIGABYTE

GIGABYTE E143-E30-AAG1 barebone server AMD EPYC 8004 1U 2-bay Gen5 NVMe/SATA/SAS-4 12 DIMMs

SKU CH-DXNQ-R3PPQ MPN E143-E30-AAG1

A 1U edge barebone accepting a single AMD EPYC 8004 processor, 12 DDR5 DIMMs, two 2.5-inch Gen5 NVMe/SATA/SAS-4 hot-swap bays, two FHHL PCIe Gen5 x16 slots and two OCP NIC 3.0 PCIe Gen5 x16 slots

  • Supports single AMD EPYC 8004 processor for high-density compute
  • 12 DDR5 RDIMM slots deliver large memory capacity
  • Two 2.5-inch Gen5 NVMe/SATA/SAS-4 hot-swap bays enable fast storage
  • Dual FHHL PCIe Gen5 x16 slots plus two OCP NIC 3.0 slots for expansion
  • Dual ROM architecture adds firmware redundancy

Single-socket EPYC 8004 platform

This 1U barebone server accepts one AMD EPYC 8004 series processor and provides twelve DDR5 RDIMM slots across six memory channels. It is built for edge deployments that need high core density in a shallow rack footprint.

Dual ROM with PCIe Gen5 expansion

Dual ROM architecture adds firmware redundancy for platform resilience. Two full-height half-length PCIe Gen5 x16 slots and two OCP NIC 3.0 PCIe Gen5 x16 slots enable high-throughput networking or accelerator cards.

2.5-inch Gen5 NVMe/SATA/SAS-4 bays

Two hot-swap 2.5-inch drive bays support Gen5 NVMe, SATA and SAS-4 devices simultaneously. This mix determines whether the chassis can serve both ultra-low-latency flash and high-capacity spinning media in the same 1U space.

Highlights

  • Supports single AMD EPYC 8004 processor for high-density compute
  • 12 DDR5 RDIMM slots deliver large memory capacity
  • Two 2.5-inch Gen5 NVMe/SATA/SAS-4 hot-swap bays enable fast storage
  • Dual FHHL PCIe Gen5 x16 slots plus two OCP NIC 3.0 slots for expansion
  • Dual ROM architecture adds firmware redundancy

Specifications

No published specifications for this item yet.

Questions about this item

Which storage drives in the 2.5-inch bays may need replacement after heavy write cycles?

The two 2.5-inch hot-swap bays accept NVMe, SATA or SAS-4 drives; any drive installed there can be swapped later when its endurance limit is reached.

What thermal limit appears first when both PCIe Gen5 x16 slots and both OCP NIC 3.0 slots are fully loaded?

The 1U chassis must cool the EPYC 8004 processor, twelve DDR5 DIMMs and four full-length Gen5 cards simultaneously, so case airflow becomes the limiting factor.

How much power does the 1GbE LAN port add when the server runs continuously?

The single Intel I210-AT port draws only a few watts, so the dominant power draw comes from the EPYC 8004 CPU, memory and any installed add-in cards.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.