We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two grey rectangular thermal pads on a light background

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme 80x40 1mm thermal pad (2pcs)

SKU CH-QM6B-ZKWPP

Thermal pad measuring 80 by 40 millimetres and 1 millimetre thick, supplied as two pieces for RAM, VRM or M.2 SSD cooling

  • High heat conductivity for efficient cooling
  • Non-electrically conductive prevents short circuits
  • Non-corrosive and non-toxic for safe handling
  • Easy to apply on RAM, VRM and M.2 SSD

Precision thermal pad for dense components

The GELID SOLUTIONS GP-Extreme pad measures 80 by 40 millimetres and is one millimetre thick. Two pieces are supplied in the pack. The material is non-electrically conductive, non-corrosive, non-curing and non-toxic. It targets RAM modules, voltage-regulator zones and M.2 solid-state drives where a thin, compliant interface is required.

Upgrades from basic gap fillers

Standard silicone pads often leave air gaps on low-profile chips, reducing heat transfer. This pad conforms tightly without curing, so it maintains contact through thermal cycling. The improvement is worthwhile when stock pads are too thick or have hardened, and when the component height calls for a one-millimetre interface. Builders needing larger sheets or different thicknesses should look elsewhere.

Highlights

  • High heat conductivity for efficient cooling
  • Non-electrically conductive prevents short circuits
  • Non-corrosive and non-toxic for safe handling
  • Easy to apply on RAM, VRM and M.2 SSD

Specifications

No published specifications for this item yet.

Questions about this item

Will the 80x40 mm pad cover my M.2 SSD and VRM areas?

Each pad measures 80 by 40 mm and is 1 mm thick; two pieces are included so you can cut one for the SSD and one for the VRM.

Do I need to spread paste or just place the pad on the chip?

Peel the protective film, lay the pad directly on the component, then press the heatsink down — no spreading or curing required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.