We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown, black-orange and black-blue sleeved PSU extension cables with pre-bent connectors and combs

FormulaMod

FormulaMod Sleeved PSU Extension Kit 18AWG 30cm Brown Black-Orange Black-Blue

SKU CH-JXQ6-ZF1RF

Sleeved 18 AWG PSU extension kit with pre-bent 180° ATX 24-pin, EPS 8-pin and dual PCI-E 8-pin cables, 30 cm long in brown, black-orange and black-blue

  • ColorBrown Black&Orange Black&Blue

Color Brown Black&Orange Black&Blue

  • 18 AWG cores deliver stable power to motherboard, CPU and GPU
  • Pre-bent 180° connectors align with component buckles for tidy routing
  • 300 mm length keeps cable runs short inside compact cases
  • Kit includes ATX 24-pin, EPS 8-pin and two PCI-E 8-pin extensions
  • Male 5557 to female 5559 interfaces ensure secure, keyed connections

Extension kit for custom builds

This FormulaMod sleeved extension kit adds 300 mm of cable reach for ATX 24-pin, EPS 8-pin and two PCI-E 8-pin connectors. The 18 AWG cores and 3 mm diameter keep voltage drop low while the pre-bent 180° ends route cleanly behind the motherboard tray. Cable combs are included for a tidy finish.

Capacity and headroom

Each connector uses a Male 5557 to Female 5559 interface that matches standard PSU pin-outs. The kit handles typical high-end GPU and CPU power draws without adding bulk. Length is fixed at 30 cm so builders needing longer runs or additional PCI-E plugs will need a different solution.

Upgrade path and fit

The extensions replace stock PSU cables when the originals are too short or visually mismatched. They are worth the jump when a clean, colour-coordinated look matters and the motherboard or graphics card buckle orientation matches the pre-bent direction. Builders with reversed buckle layouts cannot use this kit.

Highlights

  • 18 AWG cores deliver stable power to motherboard, CPU and GPU
  • Pre-bent 180° connectors align with component buckles for tidy routing
  • 300 mm length keeps cable runs short inside compact cases
  • Kit includes ATX 24-pin, EPS 8-pin and two PCI-E 8-pin extensions
  • Male 5557 to female 5559 interfaces ensure secure, keyed connections

Specifications

ColorBrown Black&Orange Black&Blue

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 18 AWG extensions reach my components if I keep my existing PSU cables routed behind the motherboard tray?

Each extension is 300 mm long and adds to your current cables, so measure from the PSU to the 24-pin, EPS and PCI-E ports to confirm the total run fits your case.

How can I verify the pre-bent 180° connectors are oriented correctly after installation?

The ATX 24-pin and EPS 8-pin bends point toward the connector buckle, while the two PCI-E 8-pin bends point away from the buckle; match each to your motherboard and graphics card sockets before powering on.

What connectors and accessories are included in the kit versus what I must supply?

The box contains one ATX 24-pin, one EPS 8-pin (4+4) and two PCI-E 8-pin (6+2) male-to-female extensions plus cable combs; you reuse your existing power supply and its native cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.