We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sleeved cable kit in black-blue, black-green and brown with pre-bent 180-degree connectors

FormulaMod

FormulaMod 18AWG ATX 24Pin EPS 8Pin PCI-E 8Pin 300mm Pre-Bent 180° Kit Black-Blue Black-Green Brown

SKU CH-C7MG-QT006

Pre-bent 180-degree 18 AWG sleeved cable kit includes ATX 24-pin, EPS 8-pin and two PCI-E 8-pin connectors in black-blue, black-green and brown, 300 mm long

  • ColorBlack&Blue Black&Green Brown

Color Black&Blue Black&Green Brown

  • Pre-bent 180° connectors simplify routing in tight cases
  • 18 AWG cores deliver stable power to CPU and GPU
  • Sleeved Black-Blue, Black-Green and Brown cables match themed builds
  • Male 5557 to female 5559 interfaces ensure secure PSU connections
  • 300 mm length fits standard ATX, EPS and dual PCI-E layouts

Sleeved extension kit for ATX EPS PCIe

This FormulaMod cable kit supplies pre-bent 18 AWG extensions for a 24-pin ATX connector, one 8-pin EPS and two 8-pin PCIe plugs. The male 5557 to female 5559 interface matches standard PSU headers. Each 300 mm run is finished in a black-blue, black-green and brown colourway.

Pre-bent 180° routing with cable combs

Cables arrive bent 180° at the connector so the ATX and EPS ends curve toward the latch side while the PCIe ends curve away. Included combs keep the 3 mm diameter wires aligned for a clean interior. Builders must verify that their motherboard and graphics card latches face the expected direction before installation.

Replaces stock PSU cables in custom builds

The kit upgrades from the flat ribbon cables supplied with most power supplies, adding sleeving and fixed routing for show-quality cable management. It is not suited for systems where the connector latch orientation differs from the pre-bent direction or where longer cable runs are required.

Highlights

  • Pre-bent 180° connectors simplify routing in tight cases
  • 18 AWG cores deliver stable power to CPU and GPU
  • Sleeved Black-Blue, Black-Green and Brown cables match themed builds
  • Male 5557 to female 5559 interfaces ensure secure PSU connections
  • 300 mm length fits standard ATX, EPS and dual PCI-E layouts

Specifications

ColorBlack&Blue Black&Green Brown

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connector standard does the Male 5557 to Female 5559 interface use, and what gauge wire limits its current capacity?

The cables use an 18 AWG core with Male 5557 to Female 5559 connectors for ATX 24-pin, EPS 8-pin, and PCI-E 8-pin connections.

What clearance is needed for the pre-bent 180-degree connectors and 3 mm cable diameter?

Each connector is pre-bent 180° with a 300 mm length; ATX and EPS bend toward the buckle side, PCI-E bends away, requiring compatible header orientation.

How do I install the pre-bent cables correctly, and which orientation step is most often missed?

Match the buckle side on your motherboard and GPU headers; ATX and EPS bends face the buckle, PCI-E bends face away — incorrect buckle alignment prevents proper seating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.