We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow handheld tone generator with slide switch, push button, dual LEDs, ABN clips and RJ11 plug

FLUKE networks

FLUKE networks 26200900 Pro3000 Tone Generator with ABN Clips and RJ11 Plug tester

SKU CH-CESV-G9Z3Z MPN 26200900

Sends a loud tone up to 16 km for cable tracing and checks continuity and polarity, with ABN clips and an RJ11 plug for direct access to wire pairs and telephone jacks

  • QuantityNo
  • SpecificationsUser interface Slide switch selects Continuity or Tone Mode
  • FeaturesBattery Chemistry:Alkaline

Option Tone Generator with ABN Clips & RJ11

  • Sends a loud tone up to 16 km in most cables for locating and tracing
  • Checks continuity and polarity on inactive networks with dual-color LED indicators
  • ABN clips allow direct access to individual wire pairs without adapters
  • RJ11 plug connects directly to telephone jacks for quick testing
  • SmartTone technology generates five distinct tones to isolate individual wire pairs

Pro3000 Tone Generator for cable tracing

The Fluke Networks 26200900 Pro3000 injects a loud tone up to 16 km in most cables to locate and trace inactive wiring. It is built for network technicians who troubleshoot telephone and data networks. The unit checks continuity and polarity with dual-color LEDs and isolates individual pairs using SmartTone technology with five distinct cadences. A compatible analog probe is required for detection and is sold separately.

ABN clips and RJ11 plug simplify connections

Angled bed-of-nails clips give direct access to individual wire pairs without stripping insulation. An integrated RJ11 plug connects straight to telephone jacks, removing the need for separate adapters. The slide switch selects Continuity or Tone mode while the push button chooses Solid, Alternating or Off tone output. Solid frequency runs at 1000 Hz nominal and Alternating at 1000/1500 Hz nominal.

Verify probe compatibility and power needs

Confirm you have or will purchase a compatible analog probe to actually hear the generated tone. The generator operates on alkaline batteries; check that a fresh set is available for immediate use. A 3.5 mm jack accepts a headset for noisy environments, though the headset is sold separately. Ensure the target cables are inactive before connecting the unit.

Highlights

  • Sends a loud tone up to 16 km in most cables for locating and tracing
  • Checks continuity and polarity on inactive networks with dual-color LED indicators
  • ABN clips allow direct access to individual wire pairs without adapters
  • RJ11 plug connects directly to telephone jacks for quick testing
  • SmartTone technology generates five distinct tones to isolate individual wire pairs

Specifications

BrandFluke Networks
ModelPro3000
QuantityNo
SpecificationsUser interface
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency
1000 Hz nominal
Alternating Frequency
1000/1500 Hz nominal
Over Voltage Protection
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode
8 Vdc with fresh battery
Battery
9V alkaline
Temperature
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
FeaturesBattery Chemistry:Alkaline
Shipping weight0.91 kg
Package size413 × 305 × 103 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What battery chemistry powers the Pro3000 and how often will it need replacing?

The unit uses alkaline batteries; replacement frequency depends on how many hours per day the tone generator runs in solid or alternating mode.

Which indicator will reach its limit first during continuous tracing — the tone LED or the continuity LED?

The tone-mode LED stays lit while the generator is active; the continuity/polarity LED only illuminates when a live circuit is detected, so the tone LED shows sustained use first.

How much heat or fan noise does the generator produce when left on all day?

The Pro3000 has no fan and draws minimal current from its alkaline cells, so it runs silently and remains cool to the touch during extended operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.