FireFold
FireFold Cat5e network ethernet cable 10 ft White 350 MHz 24 AWG 50 micron gold RJ45
10 ft Cat5e patch cable with 350 MHz bandwidth, 24 AWG stranded copper conductors and 50 micron gold-plated RJ45 connectors meeting TIA/EIA-568 standards
- TypeNetwork Ethernet Cables
- Cat5E
- Length10 ft.
- ColorWhite
- 350 MHz bandwidth supports fast data transfer
- 50 micron gold-plated RJ45 connectors resist corrosion for reliable contact
- 24 AWG stranded pure copper conductors deliver consistent signal quality
- CM-rated PVC jacket with moulded strain relief protects the cable during installation
- Meets TIA/EIA-568 standard and is UL listed plus RoHS compliant
FireFold Cat5e 10 ft Patch Cable
This FireFold Cat5e patch cable measures 10 ft and uses 24 AWG stranded pure copper conductors. It terminates in 50 micron gold-plated RJ45 connectors with molded strain relief boots. The PVC jacket carries a CM rating, and the assembly is UL listed and RoHS compliant.
Suited for basic wired links.
The cable supports 350 MHz bandwidth and meets TIA/EIA-568 requirements, making it appropriate for standard Ethernet connections at a workstation or patch panel. Installers who need Category 6 or higher performance for multi-gigabit throughput should select a different cable grade.
350 MHz Cat5e rating determines fit
The 350 MHz Category 5e specification is the single figure that defines the cable's maximum frequency performance. If the network design calls for a higher category rating, this cable will not satisfy that requirement.
Highlights
- 350 MHz bandwidth supports fast data transfer
- 50 micron gold-plated RJ45 connectors resist corrosion for reliable contact
- 24 AWG stranded pure copper conductors deliver consistent signal quality
- CM-rated PVC jacket with moulded strain relief protects the cable during installation
- Meets TIA/EIA-568 standard and is UL listed plus RoHS compliant
Specifications
| Type | Network Ethernet Cables |
|---|---|
| Cat | 5E |
| Length | 10 ft. |
| Color | White |
Questions about this item
How do I install this 10 ft Cat5e cable and what step is often missed?
Align the 50 micron gold RJ45 connector with the port, push until the latch clicks, and verify the molded strain relief boot sits flush so the 24 AWG stranded conductors are not bent sharply at the jack.
What maintenance or replacement will this Cat5e patch cord need later?
Inspect the 50 micron gold plated RJ45 contacts and PVC jacket periodically; replace the cable if the gold shows wear, the boot cracks, or the 24 AWG pure copper conductors develop intermittent continuity.
What limit appears first when this 350 MHz Cat5e cable runs at sustained throughput?
The 350 MHz bandwidth ceiling and 24 AWG stranded copper attenuation restrict maximum error free distance before signal degradation requires a shorter run or higher category cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
STARTECH C6PATCH1RD 1 ft Red Cat6 network ethernet cable
- others
- 1 ft



