We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent USB-C male-to-male adapter with LED display showing voltage current power

Fervit

Fervit Transparent USB4 Adapter 40Gbps 140W LED Display

SKU CH-2HY0-2KEQM

A transparent USB4 adapter with an LED display that shows voltage, current and power while delivering up to 140 W charging and 40 Gbps data plus 8K video

  • Connect USB4 devices to 8K monitors at 60Hz
  • Transparent reversible Type-C design for easy insertion
  • Transfer data at up to 40Gbps via USB4.0
  • Deliver up to 140W power with 28V/5A support
  • Monitor voltage, current and power on LED display

8K Video USB4 Adapter with Power Display

The Fervit adapter connects USB4-equipped hosts to USB-C monitors with DP Alternate Mode. It supports single-display output up to 8K at 60 Hz, 5K at 60 Hz or 4K at 60 Hz. The reversible Type-C male-to-male design adds a transparent shell for visual interest. Data transfers reach 40 Gbps under the USB 4.0 specification.

Suits users who need real-time power monitoring

Builders who want to see voltage, current and wattage while charging will value the LED digital display. The adapter delivers up to 140 W at 28 V or 100 W at 20 V, both at 5 A. Buyers whose monitors lack a USB-C DP Alternate Mode input cannot use the video function. Anyone requiring multiple simultaneous display outputs should look elsewhere.

40 Gbps USB 4.0 data rate decides fit

The single specification that determines compatibility is the 40 Gbps USB 4.0 transfer ceiling. Host and cable must both operate at USB 4.0 to reach this bandwidth. Lower USB versions will fall back to their own limits. Verify that your source device and target monitor support the required USB 4.0 and DP Alternate Mode combination.

Highlights

  • Connect USB4 devices to 8K monitors at 60Hz
  • Transparent reversible Type-C design for easy insertion
  • Transfer data at up to 40Gbps via USB4.0
  • Deliver up to 140W power with 28V/5A support
  • Monitor voltage, current and power on LED display

Specifications

BrandFervit

Questions about this item

Should I pick the 140 W or 100 W power rating for my laptop?

The adapter delivers up to 140 W at 28 V or 100 W at 20 V, both at 5 A. Choose the higher rating only if your laptop and charger both support 28 V PD; otherwise it will negotiate down to 100 W.

What does the 40 Gbps figure mean when I plug in an external SSD?

It is the USB 4.0 ceiling. Real-world throughput depends on the drive, the host controller and cable quality, but the adapter itself will not bottleneck transfers below that limit.

Does the USB 4.0 interface cap video output at 4K or can it do 8K?

The adapter supports a single 8K display at 60 Hz, plus 5K at 60 Hz or 4K at 60 Hz, provided the monitor’s USB-C port accepts DP Alternate Mode.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.