We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 120mm industrial fan 38mm thick with PWM cable

Fans

Fans PFC1212DE 12038 120x38mm 12V 4.8A PWM case fan

SKU CH-FKVS-ABQ8M

A 120 mm × 38 mm industrial axial fan delivering 252.85 CFM at 5600 RPM with PWM speed control

  • Industrial-grade cooling with 252.85 CFM airflow
  • PWM speed control for precise thermal management
  • High static pressure of 1.412 in H2O
  • 12 V DC operation at 4.8 A current
  • Compact 120 × 38 mm frame fits dense builds

Delta PFC1212DE Industrial Cooling Fan

The Delta PFC1212DE is a 120 mm by 38 mm axial fan built for industrial equipment cooling. It operates on 12 V DC with a nominal current of 3.24 A and a maximum current of 4.8 A. The fan delivers an airflow of 252.85 CFM at a rotational speed of 5600 RPM.

Steel Frame PWM Speed Control

A sturdy steel plate frame provides structural rigidity for demanding environments. The unit supports motherboard PWM speed regulation and speed measurement feedback for precise control. A compact external rotor motor design keeps the installation depth to 38 mm while handling 57.6 W of power.

High Pressure Noise Trade Off

Static pressure reaches 1.412 in H2O (351.7 Pa) to force air through dense heat exchangers or filters. Acoustic output is rated at 66.5 dB(A), reflecting the high-performance airflow of 7.16 m³/min. Buyers needing quiet operation for desktop or home server builds should look elsewhere.

Highlights

  • Industrial-grade cooling with 252.85 CFM airflow
  • PWM speed control for precise thermal management
  • High static pressure of 1.412 in H2O
  • 12 V DC operation at 4.8 A current
  • Compact 120 × 38 mm frame fits dense builds

Specifications

No published specifications for this item yet.

Questions about this item

Does the 4-pin PWM connector on this 120 mm fan allow full speed control from a standard motherboard header?

Yes, the fan supports motherboard PWM speed regulation so the 4-pin connector lets the board vary the 5600 RPM maximum down to lower speeds.

Will the 38 mm frame depth and 120 mm square footprint fit in a typical 120 mm mounting hole pattern?

The fan measures 120 × 120 × 38 mm, so it matches the standard 120 mm hole spacing but needs 38 mm of clearance behind the mounting surface.

How do I connect the tachometer wire so the BIOS reads the 5600 RPM signal correctly?

Plug the 4-pin PWM connector into a CPU or chassis fan header; the fourth wire carries the speed measurement signal the board expects.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.