We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black axial fan, sixty by sixty by fifteen millimetres, three wires, twenty-four volts, point one one amps

Fans

Fans FBA06T24H 24V 0.11A 60x60x15 case fan

SKU CH-F94H-360E2 MPN FBA06T24H

A 60 mm square, 15 mm thick axial case fan running on 24 V at 0.11 A with a three-wire connection

  • Original Japanese Panasonic build ensures reliable cooling
  • 24 V DC operation suits industrial and server chassis
  • Three-wire connection enables speed monitoring
  • 60 × 60 × 15 mm frame fits standard mounting points
  • Low 0.11 A draw reduces power load

Axial fan for 24 V systems

The Fans FBA06T24H is a three-wire axial fan built for DC 24 V power rails. It fits equipment that needs a 60 x 60 x 15 mm footprint and draws 0.11 A during operation. The unit is new and sourced from the original Japanese Panasonic line.

Practical limits of the 24 V three-wire interface

The fan requires a steady 24 V DC supply and a three-pin header that can deliver 0.11 A. It will not start on lower voltages and offers no PWM speed control because the third wire carries a tachometer signal only. Builders without a 24 V rail or a compatible three-pin connector cannot use this model.

Capacity and headroom for targeted cooling

At its rated current the fan moves air through a 60 x 60 mm frame that is 15 mm thick, suited for spot cooling on dense boards or small enclosures. It handles steady loads within the specified voltage and current envelope. Demands for higher static pressure, greater airflow or variable-speed operation exceed what this fixed-speed design can provide.

Highlights

  • Original Japanese Panasonic build ensures reliable cooling
  • 24 V DC operation suits industrial and server chassis
  • Three-wire connection enables speed monitoring
  • 60 × 60 × 15 mm frame fits standard mounting points
  • Low 0.11 A draw reduces power load

Specifications

No published specifications for this item yet.

Questions about this item

Is the 60 mm × 60 mm × 15 mm size the right fit for my build?

The fan measures 60 mm square and 15 mm thick, a standard compact footprint for tight chassis or targeted component cooling.

What does the 0.11 A current draw mean for everyday operation?

At 24 V the fan pulls 0.11 A, so it adds only a small load to a 24 V rail and runs quietly in low-power cooling roles.

How does the three-wire connection affect speed control?

The third wire provides a tachometer signal, letting the motherboard or fan controller monitor RPM while voltage regulates speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.