We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New axial case fan with metal frame and visible motor hub

Fans

Fans A2D200-AA02-33 ebm axial case fan 50Hz 2750rpm

SKU CH-WC21-Q4PG4

An ebm-papst axial fan running at 2750 rpm on 50 Hz power, drawing 0.26 A at 230 VAC with a maximum back pressure of 200 Pa

  • Axial design saves installation depth in tight chassis
  • 230 VAC or 400 VAC three-phase supply covers industrial power standards
  • 2750 rpm at 50 Hz delivers strong airflow for heat exchange
  • 53 W power draw at nominal speed keeps energy use low
  • CE approval confirms compliance with European safety requirements

Industrial axial fan for 230 VAC systems

This 230 VAC axial fan delivers 2800 rpm at 50 Hz with a power draw of 53 W and a current draw of 0.26 A. It is built for equipment that requires steady airflow in a compact housing and operates reliably from -25 °C to 75 °C.

Replaces legacy AC motor fans

The unit suits installations where a direct 230 VAC supply is available and variable-speed control is not required. The jump is worth it when the existing fan cannot meet the 200 Pa back-pressure target or when the ambient range must extend to 75 °C.

Handles continuous airflow through heat exchangers

At 2800 rpm the fan moves air efficiently across restrictive paths up to its 200 Pa limit. It runs out of headroom when system resistance exceeds that pressure or when the supply frequency shifts to 60 Hz and the motor draws 70 W at 3150 rpm.

Highlights

  • Axial design saves installation depth in tight chassis
  • 230 VAC or 400 VAC three-phase supply covers industrial power standards
  • 2750 rpm at 50 Hz delivers strong airflow for heat exchange
  • 53 W power draw at nominal speed keeps energy use low
  • CE approval confirms compliance with European safety requirements

Specifications

No published specifications for this item yet.

Questions about this item

What voltage and frequency does the A2D200-AA02-33 fan require for 50 Hz operation?

The fan runs on 230 VAC at 50 Hz, drawing 0.26 A and consuming 53 W at 2800 rpm.

How do I wire the three-phase motor correctly for a Y connection?

Connect the three supply lines to the Y terminals; the motor is factory-set for Y wiring at both 230 V and 400 V.

When should I expect to replace the fan given its temperature rating?

The fan is rated for continuous ambient temperatures from -25 °C to 75 °C; plan replacement if operating near the 75 °C limit for extended periods.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.