Fans
Fans 8214JN 8038 24V 10.8W 80x80x38mm case fan
DC 24V case fan measuring 80x80x38mm draws 0.45A at 10.8W with two-wire connection
- 24 V DC power suits industrial and inverter systems
- 8 W draw at 0.45 A keeps energy use low
- 80 × 80 × 38 mm frame fits standard 8038 mountings
- Two-wire connection simplifies installation and wiring
DC 24 V 8038 inverter cooling fan
This 80 mm square fan measures 38 mm deep and runs on 24 V DC power. It draws 0.45 A at 10.8 W and uses a simple two-wire connection. The 8214JN model is built for inverter and industrial cooling applications.
Suitable for 24 V DC chassis and inverter enclosures
It suits builders who have a 24 V supply and need an 8038 form-factor replacement. It is not for systems that lack a 24 V source, setups requiring speed-control signals, or projects that demand a different mounting footprint.
Highlights
- 24 V DC power suits industrial and inverter systems
- 8 W draw at 0.45 A keeps energy use low
- 80 × 80 × 38 mm frame fits standard 8038 mountings
- Two-wire connection simplifies installation and wiring
Specifications
No published specifications for this item yet.
Questions about this item
What does the 10.8 W power draw mean for my 24 V system?
The fan draws 0.45 A at 24 V, so it needs a header or supply that can deliver at least 10.8 W continuously.
How does the two-wire interface limit speed control?
With only power and ground wires the fan runs at full speed whenever voltage is applied; PWM or voltage regulation requires a three- or four-wire model.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



