We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular motorcycle USB charger with dual ports red LED voltmeter on/off switch rubber covers SAE connector ring terminals

EXTRACTME Motorcycle USB Charger 6.8A QC 3.0 Dual Port Voltmeter Switch

SKU CH-ZNZF-1QNNE

Dual USB-A ports deliver up to 6.8 A total output with Quick Charge 3.0, plus a red LED voltmeter and on/off switch for 12 V–24 V motorcycle systems

  • Dual USB-A ports deliver 24 W Quick Charge 3.0, reaching 50 % phone charge in 30 minutes
  • Handlebar or screw mount fits 1.9–2.2 cm bars for quick installation on most motorcycles
  • SAE connector with 10 A fuse harness plugs directly to battery or factory SAE port
  • Red LED voltmeter monitors 6–30 V system voltage and ON/OFF switch cuts all power to prevent drain
  • Waterproof silicone cap and ABS housing protect internals from rain, dust and vibration

Dual-port motorcycle charger

The EXTRACTME motorcycle USB charger delivers 6.8 A total output through two USB-A ports with Quick Charge 3.0 support. It accepts 12 V to 24 V DC input and provides 5 V at 3.4 A, 9 V at 2.5 A or 12 V at 2 A. A red LED voltmeter shows real-time battery voltage between 6 V and 30 V. An integrated on/off switch cuts power to both the ports and the display.

Handlebar or direct-battery mounting

The unit clamps to handlebars measuring 1.9 cm to 2.2 cm in diameter and also includes a 10 A fused SAE-to-ring-terminal harness for direct battery connection. A waterproof silicone cover protects the ports when not in use. Polarity-sensitive wiring requires correct red-positive and black-negative installation to function.

Sustained-load behaviour

Intelligent IC circuitry manages output to prevent short-circuit, over-current, over-heating and over-charging during continuous operation. The voltmeter monitors system health automatically while riding; voltage below 12 V signals a battery that needs replacement. ABS housing resists scratches and environmental exposure over long periods.

Highlights

  • Dual USB-A ports deliver 24 W Quick Charge 3.0, reaching 50 % phone charge in 30 minutes
  • Handlebar or screw mount fits 1.9–2.2 cm bars for quick installation on most motorcycles
  • SAE connector with 10 A fuse harness plugs directly to battery or factory SAE port
  • Red LED voltmeter monitors 6–30 V system voltage and ON/OFF switch cuts all power to prevent drain
  • Waterproof silicone cap and ABS housing protect internals from rain, dust and vibration

Specifications

BrandEXTRACTME

Questions about this item

Does the 6.8 A dual-port output drop when the handlebar-mounted unit gets hot on long rides?

The charger uses ABS housing and an intelligent IC with over-heating protection, but no thermal-throttling current figure is published for sustained high-load use.

How loud is the cooling and how much heat does the voltmeter-plus-switch assembly add during all-day operation?

There is no fan; the unit relies on passive ABS dissipation, so it runs silently and adds only the heat generated by the 24 W maximum output.

My bike has no SAE port — what extra parts do I need to connect this charger to the battery?

A 10 A fused SAE-to-ring-terminal harness is included, so you only need basic tools to attach the ring terminals to the battery posts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.