ESTONE
ESTONE SLF-HD112 3 Port HDMI Switch 1920 x 1080 250 MHz
Three HDMI sources connect to one display at up to 1920 x 1080 with 250 MHz bandwidth, switched by remote or button
- TypeHDMI Switchers
- Changer TypeHDMI Switch/Extender
- ColorBlack
- Ports3
- Cable Length5 in.
- MatrixYes
- 3 input ports connect multiple devices without cable swapping
- Infrared remote lets you change sources from across the room
- 24K gold-plated connectors resist corrosion for reliable signal
- 1920 x 1080 resolution at 250 MHz bandwidth delivers clear 1080p video
- 5 V USB power cable included for wide device compatibility
Three-input HDMI switch
The ESTONE SLF-HD112 connects three HDMI sources to a single display port on a television, monitor or projector. A built-in button and an included infrared remote let the user change inputs without leaving the sofa. Gold-plated connectors resist corrosion and maintain signal integrity over time.
Remote and power cable included
The supplied remote enables one-key switching from a distance, while the USB power cable draws 5 V from any convenient port to keep the unit running. No separate wall wart is required, reducing cable clutter behind the screen. Both accessories are in the box so the switch works immediately after unpacking.
Compact black chassis with gold ports
The 5-inch pigtail cable reaches nearby devices without strain, and the standard HDMI connectors fit common cables securely. Gold-plated contacts withstand repeated insertion cycles in home-theatre or gaming setups. The switch does not support resolutions above 1920 x 1080 or bandwidth beyond 250 MHz, so 4K 60 Hz sources will not pass through at full quality.
Highlights
- 3 input ports connect multiple devices without cable swapping
- Infrared remote lets you change sources from across the room
- 24K gold-plated connectors resist corrosion for reliable signal
- 1920 x 1080 resolution at 250 MHz bandwidth delivers clear 1080p video
- 5 V USB power cable included for wide device compatibility
Specifications
| Brand | ESTONE |
|---|---|
| Model | SLF-HD112 |
| Type | HDMI Switchers |
| Changer Type | HDMI Switch/Extender |
| Color | Black |
| Ports | 3 |
| Cable Length | 5 in. |
| Matrix | Yes |
| Connector Style | Standard |
| Maximum Resolutions | 1920 x 1080 |
| Bandwidth | 250 MHz |
Questions about this item
Will the gold-plated HDMI ports on the SLF-HD112 need cleaning or replacement over time?
The 24K gold plating resists corrosion and tarnish, so the ports should not require routine cleaning or replacement under normal use.
What bandwidth limit appears first when running the switch at 1080p for long periods?
The 250 MHz bandwidth ceiling is the first hard limit; it caps the maximum supported resolution at 1920 x 1080.
Does the SLF-HD112 generate noticeable heat or fan noise when powered continuously?
The unit has no fan and draws only 5 V via the included USB power cable, so it runs silently with minimal heat during all-day operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



