We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with three RJ45 ports, one button, LED, short attached cable

ESTONE

ESTONE OZHW7 2-port RJ45 network switch selector

SKU CH-3VX0-D3GXD

A two-port RJ45 switch selector lets one device toggle between two networks or two devices share one cable with physical isolation and LED status indication

  • TypeEthernet Switch Selector
  • ColorBlack
  • SpecificationsSize: 4cm x 3.5cm x 2.1cm Length:0.8meters(2.62 FT) USB Powe
  • Connector StyleRJ45
  • Features2-port RJ45 Network Switch: A computer, two network switchin
  • Dimensions5.91 x 4.13 x 1.14 inches
  • One-button switching between two networks with physical isolation
  • Select which device uses a single Ethernet connection
  • Aluminium housing for durable, long-lasting use
  • LED indicator shows active network status at a glance
  • Compact 4 cm × 3.5 cm × 2.1 cm form factor fits tight spaces

Two-port RJ45 network selector

The ESTONE OZHW7 is a bi-directional Ethernet switch selector that lets a single device choose between two wired networks or lets one network feed two devices alternately. A single button toggles the active path with physical isolation, so only one link is live at a time. It is built for administrators, developers and home-office users who need to move between separate LAN segments without unplugging cables. The compact aluminium housing measures 4cm by 3.5cm by 2.1cm and draws 3.3 V from a USB source.

Replaces manual cable swapping

Instead of reaching behind a desk to exchange patch cords, the selector provides one-click switching between an internal and an external network or between two workstations sharing one uplink. The jump is worth it when frequent network changes cause wear on ports or when IP conflicts must be avoided by guaranteeing physical separation. It supports Cat5 through Cat8 cabling at up to 1000 Mbps and 2.5G or 5G signalling rates. The device cannot activate both paths simultaneously and cannot power down both ports at once.

Tool-less installation with USB power

Connect the three RJ45 cables, plug the short USB lead into any 3.3 V port and the unit is ready; no drivers or reboot are required. LED indicators show which port is active. The 0.8 metre tether limits placement to within 2.62 ft of the USB source, so verify reach before routing cables. The only common issue is forgetting that both ports cannot be online together, which results in a dead link until the button is pressed again.

Highlights

  • One-button switching between two networks with physical isolation
  • Select which device uses a single Ethernet connection
  • Aluminium housing for durable, long-lasting use
  • LED indicator shows active network status at a glance
  • Compact 4 cm × 3.5 cm × 2.1 cm form factor fits tight spaces

Specifications

BrandESTONE
ModelOZHW7
TypeEthernet Switch Selector
ColorBlack
SpecificationsSize: 4cm x 3.5cm x 2.1cm
Length:0.8meters(2.62 FT)
USB Power Supply :3.3V
Type: RJ45 splitter with shielded, suitable for Cat 5 / Cat 5e / Cat 6 / Cat 7
Ports: 1 female to 2 female adapter (8P8C)
Connector StyleRJ45
Features2-port RJ45 Network Switch: A computer, two network switching, easy to use, no need to restart the computer when using.you can switch between each network in the internal network and external network chain at will.
High-Speed Transmission: Using Category 6 Ethernet cables and RJ45 connectors,the 2.5G/5G Ethernet switch can support Max 10000Mbps,it can be 1 in and 2 out, or 2 in and 1 out,ensuring and efficient data transfer.
Physical Isolation,mechanical switch: 2-port RJ45 network switch has a switch button. When selecting the port that needs to work,simply press the button.It is a
Dimensions5.91 x 4.13 x 1.14 inches
Weight1.41 ounces
Package Quantity1
Package Contents1 X 2 Ports 2.5G/5G Gigabit Network Switch

Questions about this item

What are the exact dimensions of the OZHW7 switch selector?

The unit measures 4 cm by 3.5 cm by 2.1 cm, which is 5.91 by 4.13 by 1.14 inches, and the attached cable is .8 metres or 2.62 feet long.

How do I install the selector and what is the common mistake to avoid?

Plug the single RJ45 cable into the common port and the two networks or devices into the switched ports, connect the USB power lead to a 3.3 V source, then press the button to select the active path; the mistake is expecting both ports to work at once, which the hardware prevents.

What maintenance or replacement will the OZHW7 need over time?

No scheduled maintenance is required; if the LED status indicator fails or the button becomes unreliable, replace the whole selector as there are no user-serviceable parts inside.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.